Deutsch
English
Menu

Blog

Giant Game Pad

Olaf Lüke - 10 years, 2 months ago

Some time ago we announced the Giant Game Pad, today we finally want to release it.

https://www.tinkerforge.com/de/doc/_images/Kits/ggp_table_top_600.jpg

It is possible to build a giant touch controller (for example to control games). The kit consists of different plastic pieces which can be used as touch pads. Depending on the application the user can choose the necessary pads and can connect them to a Multi Touch Bricklet.

https://www.tinkerforge.com/en/doc/_images/Kits/ggp_content_600.jpg

The kit is designed to resemble the pads of a (S)NES controller and consists of:

  • 4x 10x10cm square for the D-Pad

  • 4x 10x4cm ractangle for Start, Select and two additional buttons

  • 4x 10cm circle for A, B, X and Y

To turn the PMMA pieces into touch panels the following items are included:

  • 2x Self-Adhesive Aluminum Tape (1m)

  • 1x Stranded Wire 1x0.14mm² (10m)

  • 1x 12 Pole IDC Connector

  • 12x Self-Adhesive Non-Slip Rubber Feet

We look forward to seeing your projects with this kit!

Starter Kit: Server Room Monitoring now with Aluminum Front Panel

Olaf Lüke - 10 years, 3 months ago

https://www.tinkerforge.com/de/doc/_images/Kits/server_room_monitoring_alu_front_350.jpg

The Starter Kit: Server Room Monitoring will now be delivered with a powder coated aluminum front panel instead of the PMMA (acrylic) panel.

https://www.tinkerforge.com/de/doc/_images/Kits/server_room_monitoring_alu_surface_350.jpg

The new panel fits better in the metal front panels of server racks that are typically used. The old PMMA front panel was a bit fragile, because of the lenght it broke easily if dropped from a moderate height. With the new aluminum version this will not happen.

https://www.tinkerforge.com/de/doc/_images/Kits/server_room_monitoring_alu_in_hand_600.jpg

News: IoT with JavaFX / iOS Apps in App Store

Olaf Lüke - 10 years, 3 months ago

https://www.tinkerforge.com/static/img/_stuff/iot_java.jpg

(Picture: Copyright S&S Media)

Internet of Things with Java Series

The JAXenter Magazine is currently publishing a series about Internet of Things (IoT) with Tinkerforge and Java. The author Sven Ruppert has set himself the target to go step by step into the world of the internet of things. A new article is realeased weekly. The articles can be found here. The english version of the series is published at rapidpm.

https://www.tinkerforge.com/static/img/_stuff/ios_apps.jpg

iOS App for Starter Kit: Hardware Hacking

Its been a while since we published the Starter Kit: Hardware Hacking. Now we can finally announce that the IOS Apps for the kit are available in the App Store.

Perl bindings ready

Olaf Lüke - 10 years, 3 months ago

The Perl bindings are now ready to use!

https://www.tinkerforge.com/static/img/_stuff/perl.jpg

If you find bugs, please report them in the generator git: https://github.com/Tinkerforge/generators