This Bricklet is deprecated. Is has been replaced by the Analog Out Bricklet 2.0. It is only sold as long as stock lasts.
The Analog Out Bricklet can be used to extend the features of Bricks by the capability to generate voltages between 0V and 5V*. The voltage can be configured directly in Volt without any conversion. The device is equipped with a 12-bit Digital-to-Analog Converter (DAC). Instead of generating a voltage it is also possible to choose between a 1kΩ, 100kΩ or 500kΩ load resistor to ground (pull-down).
For more information click here.
Property Value DAC MCP4725 Current Consumption 1mA Voltage 0V - 5V* in 1mV steps, 12bit resolution Maximum Output Current 24mA Dimensions (W x D x H) 30 x 25 x 14mm (1.18 x 0.98 x 0.55”) Weight 6g
* The maximum output voltage depends on the supply voltage. If the connected Brick is powered over USB, 5V may not be reached. The reason for this is a voltage drop about 0.5V caused by protection diodes on our products. If you need to reach 5V, you have to use a stack supply, e.g. the Step-Down Power Supply.
Comes Packaged With