C# - IO-4 Bricklet

This is the description of the C# API bindings for the IO-4 Bricklet. General information and technical specifications for the IO-4 Bricklet are summarized in its hardware description.

An installation guide for the C# API bindings is part of their general description.

Examples

The example code below is Public Domain (CC0 1.0).

Input

Download (ExampleInput.cs)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
using System;
using Tinkerforge;

class Example
{
    private static string HOST = "localhost";
    private static int PORT = 4223;
    private static string UID = "XYZ"; // Change XYZ to the UID of your IO-4 Bricklet

    static void Main()
    {
        IPConnection ipcon = new IPConnection(); // Create IP connection
        BrickletIO4 io = new BrickletIO4(UID, ipcon); // Create device object

        ipcon.Connect(HOST, PORT); // Connect to brickd
        // Don't use device before ipcon is connected

        // Get current value as bitmask
        byte valueMask = io.GetValue();
        Console.WriteLine("Value Mask: " + Convert.ToString(valueMask, 2));

        Console.WriteLine("Press enter to exit");
        Console.ReadLine();
        ipcon.Disconnect();
    }
}

Output

Download (ExampleOutput.cs)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
using System;
using Tinkerforge;

class Example
{
    private static string HOST = "localhost";
    private static int PORT = 4223;
    private static string UID = "XYZ"; // Change XYZ to the UID of your IO-4 Bricklet

    static void Main()
    {
        IPConnection ipcon = new IPConnection(); // Create IP connection
        BrickletIO4 io = new BrickletIO4(UID, ipcon); // Create device object

        ipcon.Connect(HOST, PORT); // Connect to brickd
        // Don't use device before ipcon is connected

        // Set pin 1 to output low
        io.SetConfiguration(1 << 1, 'o', false);

        // Set pin 2 and 3 to output high
        io.SetConfiguration((1 << 2) | (1 << 3), 'o', true);

        Console.WriteLine("Press enter to exit");
        Console.ReadLine();
        ipcon.Disconnect();
    }
}

Interrupt

Download (ExampleInterrupt.cs)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
using System;
using Tinkerforge;

class Example
{
    private static string HOST = "localhost";
    private static int PORT = 4223;
    private static string UID = "XYZ"; // Change XYZ to the UID of your IO-4 Bricklet

    // Callback function for interrupt callback
    static void InterruptCB(BrickletIO4 sender, byte interruptMask, byte valueMask)
    {
        Console.WriteLine("Interrupt Mask: " + Convert.ToString(interruptMask, 2));
        Console.WriteLine("Value Mask: " + Convert.ToString(valueMask, 2));
        Console.WriteLine("");
    }

    static void Main()
    {
        IPConnection ipcon = new IPConnection(); // Create IP connection
        BrickletIO4 io = new BrickletIO4(UID, ipcon); // Create device object

        ipcon.Connect(HOST, PORT); // Connect to brickd
        // Don't use device before ipcon is connected

        // Register interrupt callback to function InterruptCB
        io.InterruptCallback += InterruptCB;

        // Enable interrupt on pin 0
        io.SetInterrupt(1 << 0);

        Console.WriteLine("Press enter to exit");
        Console.ReadLine();
        ipcon.Disconnect();
    }
}

API

Generally, every method of the C# bindings that returns a value can throw a Tinkerforge.TimeoutException. This exception gets thrown if the device did not respond. If a cable based connection is used, it is unlikely that this exception gets thrown (assuming nobody plugs the device out). However, if a wireless connection is used, timeouts will occur if the distance to the device gets too big.

Since C# does not support multiple return values directly, we use the out keyword to return multiple values from a method.

The namespace for all Brick/Bricklet bindings and the IPConnection is Tinkerforge.*.

All methods listed below are thread-safe.

Basic Functions

class BrickletIO4(string uid, IPConnection ipcon)
Parameters:
  • uid – Type: string
  • ipcon – Type: IPConnection
Returns:
  • io4 – Type: BrickletIO4

Creates an object with the unique device ID uid:

BrickletIO4 io4 = new BrickletIO4("YOUR_DEVICE_UID", ipcon);

This object can then be used after the IP Connection is connected.

void BrickletIO4.SetValue(byte valueMask)
Parameters:
  • valueMask – Type: byte, Range: [0 to 15]

Sets the output value (high or low) with a bitmask (4bit). A 1 in the bitmask means high and a 0 in the bitmask means low.

For example: The value 3 or 0b0011 will turn the pins 0-1 high and the pins 2-3 low.

All running monoflop timers will be aborted if this function is called.

Note

This function does nothing for pins that are configured as input. Pull-up resistors can be switched on with SetConfiguration().

byte BrickletIO4.GetValue()
Returns:
  • valueMask – Type: byte, Range: [0 to 15]

Returns a bitmask of the values that are currently measured. This function works if the pin is configured to input as well as if it is configured to output.

void BrickletIO4.SetConfiguration(byte selectionMask, char direction, bool value)
Parameters:
  • selectionMask – Type: byte, Range: [0 to 15]
  • direction – Type: char, Range: See constants, Default: 'i'
  • value – Type: bool, Default: true

Configures the value and direction of the specified pins. Possible directions are 'i' and 'o' for input and output.

If the direction is configured as output, the value is either high or low (set as true or false).

If the direction is configured as input, the value is either pull-up or default (set as true or false).

For example:

  • (15, 'i', true) or (0b1111, 'i', true) will set all pins of as input pull-up.
  • (8, 'i', false) or (0b1000, 'i', false) will set pin 3 of as input default (floating if nothing is connected).
  • (3, 'o', false) or (0b0011, 'o', false) will set pins 0 and 1 as output low.
  • (4, 'o', true) or (0b0100, 'o', true) will set pin 2 of as output high.

Running monoflop timers for the specified pins will be aborted if this function is called.

The following constants are available for this function:

For direction:

  • BrickletIO4.DIRECTION_IN = 'i'
  • BrickletIO4.DIRECTION_OUT = 'o'
void BrickletIO4.GetConfiguration(out byte directionMask, out byte valueMask)
Output Parameters:
  • directionMask – Type: byte, Range: [0 to 15]
  • valueMask – Type: byte, Range: [0 to 15]

Returns a value bitmask and a direction bitmask. A 1 in the direction bitmask means input and a 0 in the bitmask means output.

For example: A return value of (3, 5) or (0b0011, 0b0101) for direction and value means that:

  • pin 0 is configured as input pull-up,
  • pin 1 is configured as input default,
  • pin 2 is configured as output high and
  • pin 3 is are configured as output low.
long BrickletIO4.GetEdgeCount(byte pin, bool resetCounter)
Parameters:
  • pin – Type: byte, Range: [0 to 3]
  • resetCounter – Type: bool
Returns:
  • count – Type: long, Range: [0 to 232 - 1]

Returns the current value of the edge counter for the selected pin. You can configure the edges that are counted with SetEdgeCountConfig().

If you set the reset counter to true, the count is set back to 0 directly after it is read.

New in version 2.0.1 (Plugin).

Advanced Functions

void BrickletIO4.SetMonoflop(byte selectionMask, byte valueMask, long time)
Parameters:
  • selectionMask – Type: byte, Range: [0 to 15]
  • valueMask – Type: byte, Range: [0 to 15]
  • time – Type: long, Unit: 1 ms, Range: [0 to 232 - 1]

Configures a monoflop of the pins specified by the first parameter as 4 bit long bitmask. The specified pins must be configured for output. Non-output pins will be ignored.

The second parameter is a bitmask with the desired value of the specified output pins. A 1 in the bitmask means high and a 0 in the bitmask means low.

The third parameter indicates the time that the pins should hold the value.

If this function is called with the parameters (9, 1, 1500) or (0b1001, 0b0001, 1500): Pin 0 will get high and pin 3 will get low. In 1.5s pin 0 will get low and pin 3 will get high again.

A monoflop can be used as a fail-safe mechanism. For example: Lets assume you have a RS485 bus and an IO-4 Bricklet connected to one of the slave stacks. You can now call this function every second, with a time parameter of two seconds and pin 0 set to high. Pin 0 will be high all the time. If now the RS485 connection is lost, then pin 0 will get low in at most two seconds.

void BrickletIO4.GetMonoflop(byte pin, out byte value, out long time, out long timeRemaining)
Parameters:
  • pin – Type: byte, Range: [0 to 3]
Output Parameters:
  • value – Type: byte, Range: [0 to 1]
  • time – Type: long, Unit: 1 ms, Range: [0 to 232 - 1]
  • timeRemaining – Type: long, Unit: 1 ms, Range: [0 to 232 - 1]

Returns (for the given pin) the current value and the time as set by SetMonoflop() as well as the remaining time until the value flips.

If the timer is not running currently, the remaining time will be returned as 0.

void BrickletIO4.SetSelectedValues(byte selectionMask, byte valueMask)
Parameters:
  • selectionMask – Type: byte, Range: [0 to 15]
  • valueMask – Type: byte, Range: [0 to 15]

Sets the output value (high or low) with a bitmask, according to the selection mask. The bitmask is 4 bit long, true refers to high and false refers to low.

For example: The parameters (9, 4) or (0b0110, 0b0100) will turn pin 1 low and pin 2 high, pin 0 and 3 will remain untouched.

Running monoflop timers for the selected pins will be aborted if this function is called.

Note

This function does nothing for pins that are configured as input. Pull-up resistors can be switched on with SetConfiguration().

void BrickletIO4.SetEdgeCountConfig(byte selectionMask, byte edgeType, byte debounce)
Parameters:
  • selectionMask – Type: byte, Range: [0 to 15]
  • edgeType – Type: byte, Range: See constants, Default: 0
  • debounce – Type: byte, Unit: 1 ms, Range: [0 to 255], Default: 100

Configures the edge counter for the selected pins.

The edge type parameter configures if rising edges, falling edges or both are counted if the pin is configured for input. Possible edge types are:

  • 0 = rising (default)
  • 1 = falling
  • 2 = both

Configuring an edge counter resets its value to 0.

If you don't know what any of this means, just leave it at default. The default configuration is very likely OK for you.

The following constants are available for this function:

For edgeType:

  • BrickletIO4.EDGE_TYPE_RISING = 0
  • BrickletIO4.EDGE_TYPE_FALLING = 1
  • BrickletIO4.EDGE_TYPE_BOTH = 2

New in version 2.0.1 (Plugin).

void BrickletIO4.GetEdgeCountConfig(byte pin, out byte edgeType, out byte debounce)
Parameters:
  • pin – Type: byte, Range: [0 to 3]
Output Parameters:
  • edgeType – Type: byte, Range: See constants, Default: 0
  • debounce – Type: byte, Unit: 1 ms, Range: [0 to 255], Default: 100

Returns the edge type and debounce time for the selected pin as set by SetEdgeCountConfig().

The following constants are available for this function:

For edgeType:

  • BrickletIO4.EDGE_TYPE_RISING = 0
  • BrickletIO4.EDGE_TYPE_FALLING = 1
  • BrickletIO4.EDGE_TYPE_BOTH = 2

New in version 2.0.1 (Plugin).

void BrickletIO4.GetIdentity(out string uid, out string connectedUid, out char position, out byte[] hardwareVersion, out byte[] firmwareVersion, out int deviceIdentifier)
Output Parameters:
  • uid – Type: string, Length: up to 8
  • connectedUid – Type: string, Length: up to 8
  • position – Type: char, Range: ['a' to 'h', 'z']
  • hardwareVersion – Type: byte[], Length: 3
    • 0: major – Type: byte, Range: [0 to 255]
    • 1: minor – Type: byte, Range: [0 to 255]
    • 2: revision – Type: byte, Range: [0 to 255]
  • firmwareVersion – Type: byte[], Length: 3
    • 0: major – Type: byte, Range: [0 to 255]
    • 1: minor – Type: byte, Range: [0 to 255]
    • 2: revision – Type: byte, Range: [0 to 255]
  • deviceIdentifier – Type: int, Range: [0 to 216 - 1]

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). A Bricklet connected to an Isolator Bricklet is always at position 'z'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Bricklet.

Callback Configuration Functions

void BrickletIO4.SetDebouncePeriod(long debounce)
Parameters:
  • debounce – Type: long, Unit: 1 ms, Range: [0 to 232 - 1], Default: 100

Sets the debounce period of the InterruptCallback callback.

For example: If you set this value to 100, you will get the interrupt maximal every 100ms. This is necessary if something that bounces is connected to the IO-4 Bricklet, such as a button.

long BrickletIO4.GetDebouncePeriod()
Returns:
  • debounce – Type: long, Unit: 1 ms, Range: [0 to 232 - 1], Default: 100

Returns the debounce period as set by SetDebouncePeriod().

void BrickletIO4.SetInterrupt(byte interruptMask)
Parameters:
  • interruptMask – Type: byte, Range: [0 to 15]

Sets the pins on which an interrupt is activated with a bitmask. Interrupts are triggered on changes of the voltage level of the pin, i.e. changes from high to low and low to high.

For example: An interrupt bitmask of 10 or 0b1010 will enable the interrupt for pins 1 and 3.

The interrupt is delivered with the InterruptCallback callback.

byte BrickletIO4.GetInterrupt()
Returns:
  • interruptMask – Type: byte, Range: [0 to 15]

Returns the interrupt bitmask as set by SetInterrupt().

Callbacks

Callbacks can be registered to receive time critical or recurring data from the device. The registration is done by appending your callback handler to the corresponding event:

void MyCallback(BrickletIO4 sender, int value)
{
    System.Console.WriteLine("Value: " + value);
}

io4.ExampleCallback += MyCallback;

The available events are described below.

Note

Using callbacks for recurring events is always preferred compared to using getters. It will use less USB bandwidth and the latency will be a lot better, since there is no round trip time.

event BrickletIO4.InterruptCallback(BrickletIO4 sender, byte interruptMask, byte valueMask)
Callback Parameters:
  • sender – Type: BrickletIO4
  • interruptMask – Type: byte, Range: [0 to 15]
  • valueMask – Type: byte, Range: [0 to 15]

This callback is triggered whenever a change of the voltage level is detected on pins where the interrupt was activated with SetInterrupt().

The values are a bitmask that specifies which interrupts occurred and the current value bitmask.

For example:

  • (1, 1) or (0b0001, 0b0001) means that an interrupt on pin 0 occurred and currently pin 0 is high and pins 1-3 are low.
  • (9, 14) or (0b1001, 0b1110) means that interrupts on pins 0 and 3 occurred and currently pin 0 is low and pins 1-3 are high.
event BrickletIO4.MonoflopDoneCallback(BrickletIO4 sender, byte selectionMask, byte valueMask)
Callback Parameters:
  • sender – Type: BrickletIO4
  • selectionMask – Type: byte, Range: [0 to 15]
  • valueMask – Type: byte, Range: [0 to 15]

This callback is triggered whenever a monoflop timer reaches 0. The parameters contain the involved pins and the current value of the pins (the value after the monoflop).

Virtual Functions

Virtual functions don't communicate with the device itself, but operate only on the API bindings device object. They can be called without the corresponding IP Connection object being connected.

byte[] BrickletIO4.GetAPIVersion()
Output Parameters:
  • apiVersion – Type: byte[], Length: 3
    • 0: major – Type: byte, Range: [0 to 255]
    • 1: minor – Type: byte, Range: [0 to 255]
    • 2: revision – Type: byte, Range: [0 to 255]

Returns the version of the API definition implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

bool BrickletIO4.GetResponseExpected(byte functionId)
Parameters:
  • functionId – Type: byte, Range: See constants
Returns:
  • responseExpected – Type: bool

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by SetResponseExpected(). For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For functionId:

  • BrickletIO4.FUNCTION_SET_VALUE = 1
  • BrickletIO4.FUNCTION_SET_CONFIGURATION = 3
  • BrickletIO4.FUNCTION_SET_DEBOUNCE_PERIOD = 5
  • BrickletIO4.FUNCTION_SET_INTERRUPT = 7
  • BrickletIO4.FUNCTION_SET_MONOFLOP = 10
  • BrickletIO4.FUNCTION_SET_SELECTED_VALUES = 13
  • BrickletIO4.FUNCTION_SET_EDGE_COUNT_CONFIG = 15
void BrickletIO4.SetResponseExpected(byte functionId, bool responseExpected)
Parameters:
  • functionId – Type: byte, Range: See constants
  • responseExpected – Type: bool

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For functionId:

  • BrickletIO4.FUNCTION_SET_VALUE = 1
  • BrickletIO4.FUNCTION_SET_CONFIGURATION = 3
  • BrickletIO4.FUNCTION_SET_DEBOUNCE_PERIOD = 5
  • BrickletIO4.FUNCTION_SET_INTERRUPT = 7
  • BrickletIO4.FUNCTION_SET_MONOFLOP = 10
  • BrickletIO4.FUNCTION_SET_SELECTED_VALUES = 13
  • BrickletIO4.FUNCTION_SET_EDGE_COUNT_CONFIG = 15
void BrickletIO4.SetResponseExpectedAll(bool responseExpected)
Parameters:
  • responseExpected – Type: bool

Changes the response expected flag for all setter and callback configuration functions of this device at once.

Constants

int BrickletIO4.DEVICE_IDENTIFIER

This constant is used to identify a IO-4 Bricklet.

The GetIdentity() function and the IPConnection.EnumerateCallback callback of the IP Connection have a deviceIdentifier parameter to specify the Brick's or Bricklet's type.

string BrickletIO4.DEVICE_DISPLAY_NAME

This constant represents the human readable name of a IO-4 Bricklet.