The baudrate can be configured between 10kbit/s and 1Mbit/s. It is possible to apply filters to match for frames with a specific identifier.
This Bricklet ist not galvanically isolated to the Tinkerforge system. This means that there is a direct electrical connection between the terminals of the Bricklet and the rest of the system. Dependent of the application this can lead to undesired connections, ground loops or short circuits. These problems can be prevented by using the Bricklet together with a Isolator Bricklet.
The CAN Bricklet 2.0 has a 7 pole Bricklet connector and is connected to a Brick with a 7p-10p Bricklet cable.
Property Value Current Consumption 72mW (14.4mA at 5V, idle) Baudrate 10kbit/s - 1Mbit/s Maximum Throughput 1000 frames per second* Filters Disabled / Accept all / Match / Match data / Match extended Dimensions (W x D x H) 45 x 35 x 14mm (1.77 x 1.38 x 0.55") Weight 8.6g
* 1000 frames per second equals to 44kbit/s to 128kbit/s depending on the size of the frames.
Comes Packaged With