The Industrial Quad Relay Bricklet 2.0 can be used to extend Bricks by four galvanically isolated solid state relays. Each channel can switch currents of up to 1.2 Ampere with 30 Volt. Output isolation permits the usage without a direct electric connection, such that ground loops can be prevented and an additional degree of safety is added.
Typical applications are the interfacing of industrial control, such as PLC's or frequency converters, or the usage in environments were electrical ground levels can not be connected.
The Industrial Quad Relay Bricklet 2.0 has a 7 pole Bricklet connector and is connected to a Brick with a 7p-10p Bricklet cable.
Property Value Current Consumption31mW (6.2mA at 5V)+ 3mW (0.6mA at 5V) per activated relay Output Type Four galvanically isolated solid state relays Maximum Switching Current 1.2A Maximum Switching Voltage 30V Isolation 1500Vrms (datasheet value) Dimensions (W x D x H) 40 x 40 x 11mm (1.57 x 1.57 x 0.43") Weight 9g
Comes Packaged With
You may also be interested in the following product(s)