IO-16 Bricklet

IO-16 Bricklet


Incl. 19% Tax, excl. Shipping Cost

Availability: In stock

  • 16-channel digital input/output
  • Switchable logic voltage 3.3V or 5V*
  • Configurable pull-ups and interrupts
IO-16 Bricklet   +€8.98

* Required Fields



This Bricklet is deprecated. Is has been replaced by the IO-16 Bricklet 2.0. It is currently sold off with a large discount, but only as long as stock lasts.

The IO-16 Bricklet can be used to extend the features of Bricks by external digital inputs and outputs.

The Bricklet features 2x 8 I/O pins that can be independently configured as digital inputs or outputs. Each input pin can additionally be configured with a pull-up or as interrupt source. The input/output voltages can be switched manually between 3.3V and 5V*. Via terminal blocks all signals and GND can be accessed. An additional terminal block delivers the switched output voltage.

Human interfaces, such as switches, push-buttons and LEDs are typical applications of this Bricklet.

Technical Specifications

Property Value
I/O Pins 16
Current Consumption 1mA
I/O Voltages Switchable between 3.3V and 5V*
Maximum Output Current 20mA (per output pin), 125mA (total)
Maximum API Calls** set-port (1kHz), get-port (> 0.25kHz), callbacks (1kHz)
Dimensions (W x D x H) 35 x 75 x 14mm (1.38 x 2.95 x 0.55”)
Weight 30g

* The maximum output voltage depends on the supply voltage. If the connected Brick is powered over USB, 5V may not be reached. The reason for this is a voltage drop about 0.5V caused by protection diodes on our products. If you need to reach 5V, you have to use a stack supply, e.g. the Step-Down Power Supply.

** depends on your system (OS, CPU etc.)

Comes Packaged With

You may also be interested in the following product(s)