LED Strip Bricklet

LED Strip Bricklet

€0.00

Incl. 19% Tax, excl. Shipping Cost

Availability: In stock

  • Controls up to 320 RGB or 240 RGBW LEDs
  • All LEDs can be switched independently
  • Update rate of up to 100Hz for each LED possible
LED Strip Bricklet   +€5.99

* Required Fields

Description

Details

This Bricklet is deprecated. Is has been replaced by the LED Strip Bricklet 2.0. It is currently sold off with a large discount, but only as long as stock lasts.

The LED Strip Bricklet can be used to control LED strips and LED pixels that are equipped with the WS2801, WS2811, WS2812/SK6812 (NeoPixel RGB), SK6812RGBW (NeoPixel RGBW), LPD8806 or APA102 (DotStar) LED driver. It is possible to independently control 320 RGB or 240 RGBW LEDs (960 individual LEDs) over the connected Brick.

The API allows to change all LEDs at the same time with a fixed update rate of up to 100Hz. A possible application can be found in the Starter Kit: Blinken Lights: Video

Brick Daemon 2.0.10 or newer is recommended for this Bricklet.

Technical Specifications

PropertyValue
Supported LED Drivers WS2801, WS2811, WS2812/SK6812 (NeoPixel RGB), SK6812RGBW (NeoPixel RGBW), LPD8806 and APA102 (DotStar)
Current Consumption 1mA (idle), 4mA (active)
   
Resolution 8bit per LED
Maximum Number of LEDs 960 (320 RGB or 240 RGBW LEDs)*
Maximum Update Rate 100 updates per second
   
Dimensions (W x D x H) 30 x 30 x 12mm (1.18 x 1.18 x 0.47")
Weight 10g

* with a Master Brick, 480 with other Bricks

Comes Packaged With

You may also be interested in the following product(s)