The LED Strip Bricklet 2.0 can be used to control LED strips and LED pixels that are equipped with the WS2801, WS2811, WS2812/SK6812 (NeoPixel RGB), SK6812RGBW (NeoPixel RGBW), LPD8806 or APA102 (DotStar) LED driver. It is possible to independently control 2048 RGB or 1536 RGBW LEDs (6144 individual LEDs) over the connected Brick.
Note: The maximum update rate depends on type and number of attached LEDs (see here).
The LED Strip Bricklet 2.0 has a 7 pole Bricklet connector and is connected to a Brick with a 7p-10p Bricklet cable.
Property Value Supported LED DriversWS2801, WS2811, WS2812/SK6812 (NeoPixel RGB), WS2813, WS2815,SK6812RGBW (NeoPixel RGBW), LPD8806 and APA102 (DotStar) Current Consumption 64mW (12.8mA at 5V) Resolution 8bit per LED Maximum Number of LEDs 6144 (2048 RGB or 1536 RGBW LEDs) Maximum Update Rate 100 updates per second Dimensions (W x D x H) 30 x 30 x 12mm (1.18 x 1.18 x 0.47") Weight 8.1g
Comes Packaged With