The GPS Bricklet 3.0 can be used to extend Bricks by the possibility to determine their position via GPS. Additionally it is possible to receive movement (direction and velocity), altitude (altitude and geodial separation), as well as high precise time/date information and PPS signal.
Current values for elevation, azimuth and SNR for each of the GPS, GLONASS and Galileo satellites can be read out.
The GPS module is optimized to get a fast fix, has a high input sensitivity (-165dBm) and a update rate of 10Hz suitable for drones or the like. Internal interference canceller rejects RF interference from other devices like Bluetooth or Wi-Fi.
The Bricklet hast an internal antenna. Through a U.FL connector you can also connect an external antenna.
A CR1025 coin cell battery is also included. It is used as a battery backup for the last satellite position data. With this information a fix can be obtained faster if the power was lost.
Property Value GPS Module Chipset CDTop PA1616D Sensitivity -148dBm (Acquisition), -165dBm (Tracking)* Position Accuracy 3.0m (50% CEP)* Time to first Fix < 35s (without battery), < 1s (with battery)* Update Rate 10Hz Dimensions (W x D x H) 40 x 40 x 12mm (1.57 x 1.57 x 0.47”) Weight 20g (with battery) Current Consumption 73mA
* Datasheet values
Comes Packaged With
- GPS Bricklet 3.0
- CR1025 Coin Cell
- Chosen Bricklet Cable
- Chosen Mounting Kit
You may also be interested in the following product(s)
U.FL to SMA Pigtail Cable€3.99Incl. 19% Tax, excl. Shipping Cost
Case for GPS Bricklet 2.0€5.99Incl. 19% Tax, excl. Shipping Cost
GPS Antenna, SMA, 300cm cable€12.99Incl. 19% Tax, excl. Shipping Cost
Tinkerforge Workbench (34x20cm)€29.99Incl. 19% Tax, excl. Shipping Cost
Master Brick 3.1