The IMU Brick 2.0 is the successor of the IMU Brick with higher resolution sensors, easier recalibration, additional continuous self-calibration and an accuracy increase by two orders of magnitude.
The IMU Brick 2.0 is equipped with a 3-axis accelerometer, magnetometer (compass) and gyroscope and works as a USB inertial measurement unit. It can measure 9 degrees of freedom and computes quaternions, linear acceleration, gravity vector as well as independant heading, roll and pitch angles. It is a complete attitude and heading reference system.
The API, provided for many programming languages, allows access to the calculated data and also the acceleration, magnetic field and angular velocity of the three axes. If the quaternion representation is used, the IMU Brick 2.0 does not have a gimbal lock, as known from Euler angles.
The IMU Brick 2.0 can be use together with other Bricks in a stack. For example an additional Master Brick with Master Extension allows to replace the USB connection by other cable based (RS485, Ethernet) or wireless (WIFI) connections.
A comparison video between IMU Brick 1.0 and IMU Brick 2.0 is available on Youtube:
Property Value Acceleration, Magnetic,
Angular Velocity Resolution
14bit, 16bit, 16bit Heading, Roll, Pitch Resolution 0.01° steps Quaternion Resolution 16bit Sampling Rate 100Hz Bricklet Ports 2 Dimensions (W x D x H) 40 x 40 x 19mm (1.57 x 1.57 x 0.75") Weight 12g Current Consumption TBDmA
Comes Packaged With
- IMU Brick 2.0
- Chosen USB Cable
- Chosen Mounting Kit
You may also be interested in the following product(s)
€29.23Incl. 16% Tax, excl. Shipping Cost
€575.12Incl. 16% Tax, excl. Shipping Cost