Mathematica - HAT Brick

This is the description of the Mathematica API bindings for the HAT Brick. General information and technical specifications for the HAT Brick are summarized in its hardware description.

An installation guide for the Mathematica API bindings is part of their general description.

Examples

The example code below is Public Domain (CC0 1.0).

Sleep

Download (ExampleSleep.nb)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
Needs["NETLink`"]
LoadNETAssembly["Tinkerforge",NotebookDirectory[]<>"../../.."]

host="localhost"
port=4223
uid="XXYYZZ"(*Change XXYYZZ to the UID of your HAT Brick*)

(*Create IPConnection and device object*)
ipcon=NETNew["Tinkerforge.IPConnection"]
hat=NETNew["Tinkerforge.BrickHAT",uid,ipcon]
ipcon@Connect[host,port]

(*Turn Raspberry Pi and Bricklets off in 2 seconds for 30 minutes with sleep indicator enabled*)
hat@SetSleepMode[2,1800,True,True,True]

(*Clean up*)
ipcon@Disconnect[]
ReleaseNETObject[hat]
ReleaseNETObject[ipcon]

API

Generally, every method of the Mathematica bindings that returns a value can throw a Tinkerforge.TimeoutException. This exception gets thrown if the device did not respond. If a cable based connection is used, it is unlikely that this exception gets thrown (assuming nobody plugs the device out). However, if a wireless connection is used, timeouts will occur if the distance to the device gets too big.

Since .NET/Link does not support multiple return values directly, we use the out keyword to return multiple values from a method. For further information about the out keyword in .NET/Link see the corresponding Mathematica .NET/Link documentation.

The namespace for all Brick/Bricklet bindings and the IPConnection is Tinkerforge.*.

Basic Functions

BrickHAT[uid, ipcon] → hat
Parameters:
  • uid -- String
  • ipcon -- NETObject[IPConnection]
Returns:
  • hat -- NETObject[BrickHAT]

Creates an object with the unique device ID uid:

hat=NETNew["Tinkerforge.BrickHAT","YOUR_DEVICE_UID",ipcon]

This object can then be used after the IP Connection is connected (see examples above).

The .NET runtime has built-in garbage collection that frees objects that are no longer in use by a program. But because Mathematica can not automatically tell when a Mathematica "program" doesn't use a .NET object anymore, this has to be done by the program. For this the ReleaseNETObject[] function is used in the examples.

For further information about object management in .NET/Link see the corresponding Mathematica .NET/Link documentation.

BrickHAT@SetSleepMode[powerOffDelay, powerOffDuration, raspberryPiOff, brickletsOff, enableSleepIndicator] → Null
Parameters:
  • powerOffDelay -- Integer
  • powerOffDuration -- Integer
  • raspberryPiOff -- True/False
  • brickletsOff -- True/False
  • enableSleepIndicator -- True/False

Sets the sleep mode.

Note

Calling this function will cut the Raspberry Pi's power after Power Off Delay seconds. You have to shut down the Operating System yourself, e.g. by calling 'sudo shutdown -h now'.

Parameters:

  • Power Off Delay: Time in seconds before the RPi/Bricklets are powered off.
  • Power Off Duration: Duration in seconds that the RPi/Bricklets stay powered off.
  • Raspberry Pi Off: RPi is powered off if set to true.
  • Bricklets Off: Bricklets are powered off if set to true.
  • Enable Sleep Indicator: If set to true, the status LED will blink in a 1s interval during the whole power off duration. This will draw additional 0.3mA.

Example: To turn RPi and Bricklets off in 5 seconds for 10 minutes with sleep indicator enabled, call (5, 60*10, true, true, true).

This function can also be used to implement a watchdog. To do this you can write a program that calls this function once per second in a loop with (10, 2, true, false, false). If the RPi crashes or gets stuck the HAT will reset the RPi after 10 seconds.

BrickHAT@GetSleepMode[out powerOffDelay, out powerOffDuration, out raspberryPiOff, out brickletsOff, out enableSleepIndicator] → Null
Parameters:
  • powerOffDelay -- Integer
  • powerOffDuration -- Integer
  • raspberryPiOff -- True/False
  • brickletsOff -- True/False
  • enableSleepIndicator -- True/False

Returns the sleep mode settings as set by SetSleepMode[].

BrickHAT@SetBrickletPower[brickletPower] → Null
Parameters:
  • brickletPower -- True/False

Set to true/false to turn the power supply of the connected Bricklets on/off.

By default the Bricklets are on.

BrickHAT@GetBrickletPower[] → brickletPower
Returns:
  • brickletPower -- True/False

Returns the power status of the connected Bricklets as set by SetBrickletPower[].

BrickHAT@GetVoltages[out voltageUSB, out voltageDC] → Null
Parameters:
  • voltageUSB -- Integer
  • voltageDC -- Integer

Returns the USB supply voltage and the DC input supply voltage in mV.

There are three possible combinations:

  • Only USB connected: The USB supply voltage will be fed back to the DC input connector. You will read the USB voltage and a slightly lower voltage on the DC input.
  • Only DC input connected: The DC voltage will not be fed back to the USB connector. You will read the DC input voltage and the USB voltage will be 0.
  • USB and DC input connected: You will read both voltages. In this case the USB supply will be without load, but it will work as backup if you disconnect the DC input (or if the DC input voltage falls below the USB voltage).

Advanced Functions

BrickHAT@GetAPIVersion[] → {apiVersion1, apiVersion2, apiVersion3}
Returns:
  • apiVersioni -- Integer

Returns the version of the API definition (major, minor, revision) implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

BrickHAT@GetResponseExpected[functionId] → responseExpected
Parameters:
  • functionId -- Integer
Returns:
  • responseExpected -- True/False

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by SetResponseExpected[]. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

See SetResponseExpected[] for the list of function ID constants available for this function.

BrickHAT@SetResponseExpected[functionId, responseExpected] → Null
Parameters:
  • functionId -- Integer
  • responseExpected -- True/False

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

The following function ID constants are available for this function:

  • BrickHAT`FUNCTIONUSETUSLEEPUMODE = 1
  • BrickHAT`FUNCTIONUSETUBRICKLETUPOWER = 3
  • BrickHAT`FUNCTIONUSETUWRITEUFIRMWAREUPOINTER = 237
  • BrickHAT`FUNCTIONUSETUSTATUSULEDUCONFIG = 239
  • BrickHAT`FUNCTIONURESET = 243
  • BrickHAT`FUNCTIONUWRITEUUID = 248
BrickHAT@SetResponseExpectedAll[responseExpected] → Null
Parameters:
  • responseExpected -- True/False

Changes the response expected flag for all setter and callback configuration functions of this device at once.

BrickHAT@GetSPITFPErrorCount[out errorCountAckChecksum, out errorCountMessageChecksum, out errorCountFrame, out errorCountOverflow] → Null
Parameters:
  • errorCountAckChecksum -- Integer
  • errorCountMessageChecksum -- Integer
  • errorCountFrame -- Integer
  • errorCountOverflow -- Integer

Returns the error count for the communication between Brick and Bricklet.

The errors are divided into

  • ACK checksum errors,
  • message checksum errors,
  • framing errors and
  • overflow errors.

The errors counts are for errors that occur on the Bricklet side. All Bricks have a similar function that returns the errors on the Brick side.

BrickHAT@SetBootloaderMode[mode] → status
Parameters:
  • mode -- Integer
Returns:
  • status -- Integer

Sets the bootloader mode and returns the status after the requested mode change was instigated.

You can change from bootloader mode to firmware mode and vice versa. A change from bootloader mode to firmware mode will only take place if the entry function, device identifier and CRC are present and correct.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

The following constants are available for this function:

  • BrickHAT`BOOTLOADERUMODEUBOOTLOADER = 0
  • BrickHAT`BOOTLOADERUMODEUFIRMWARE = 1
  • BrickHAT`BOOTLOADERUMODEUBOOTLOADERUWAITUFORUREBOOT = 2
  • BrickHAT`BOOTLOADERUMODEUFIRMWAREUWAITUFORUREBOOT = 3
  • BrickHAT`BOOTLOADERUMODEUFIRMWAREUWAITUFORUERASEUANDUREBOOT = 4
  • BrickHAT`BOOTLOADERUSTATUSUOK = 0
  • BrickHAT`BOOTLOADERUSTATUSUINVALIDUMODE = 1
  • BrickHAT`BOOTLOADERUSTATUSUNOUCHANGE = 2
  • BrickHAT`BOOTLOADERUSTATUSUENTRYUFUNCTIONUNOTUPRESENT = 3
  • BrickHAT`BOOTLOADERUSTATUSUDEVICEUIDENTIFIERUINCORRECT = 4
  • BrickHAT`BOOTLOADERUSTATUSUCRCUMISMATCH = 5
BrickHAT@GetBootloaderMode[] → mode
Returns:
  • mode -- Integer

Returns the current bootloader mode, see SetBootloaderMode[].

The following constants are available for this function:

  • BrickHAT`BOOTLOADERUMODEUBOOTLOADER = 0
  • BrickHAT`BOOTLOADERUMODEUFIRMWARE = 1
  • BrickHAT`BOOTLOADERUMODEUBOOTLOADERUWAITUFORUREBOOT = 2
  • BrickHAT`BOOTLOADERUMODEUFIRMWAREUWAITUFORUREBOOT = 3
  • BrickHAT`BOOTLOADERUMODEUFIRMWAREUWAITUFORUERASEUANDUREBOOT = 4
BrickHAT@SetWriteFirmwarePointer[pointer] → Null
Parameters:
  • pointer -- Integer

Sets the firmware pointer for WriteFirmware[]. The pointer has to be increased by chunks of size 64. The data is written to flash every 4 chunks (which equals to one page of size 256).

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

BrickHAT@WriteFirmware[{data1, data2, ..., data64}] → status
Parameters:
  • datai -- Integer
Returns:
  • status -- Integer

Writes 64 Bytes of firmware at the position as written by SetWriteFirmwarePointer[] before. The firmware is written to flash every 4 chunks.

You can only write firmware in bootloader mode.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

BrickHAT@SetStatusLEDConfig[config] → Null
Parameters:
  • config -- Integer

Sets the status LED configuration. By default the LED shows communication traffic between Brick and Bricklet, it flickers once for every 10 received data packets.

You can also turn the LED permanently on/off or show a heartbeat.

If the Bricklet is in bootloader mode, the LED is will show heartbeat by default.

The following constants are available for this function:

  • BrickHAT`STATUSULEDUCONFIGUOFF = 0
  • BrickHAT`STATUSULEDUCONFIGUON = 1
  • BrickHAT`STATUSULEDUCONFIGUSHOWUHEARTBEAT = 2
  • BrickHAT`STATUSULEDUCONFIGUSHOWUSTATUS = 3
BrickHAT@GetStatusLEDConfig[] → config
Returns:
  • config -- Integer

Returns the configuration as set by SetStatusLEDConfig[]

The following constants are available for this function:

  • BrickHAT`STATUSULEDUCONFIGUOFF = 0
  • BrickHAT`STATUSULEDUCONFIGUON = 1
  • BrickHAT`STATUSULEDUCONFIGUSHOWUHEARTBEAT = 2
  • BrickHAT`STATUSULEDUCONFIGUSHOWUSTATUS = 3
BrickHAT@GetChipTemperature[] → temperature
Returns:
  • temperature -- Integer

Returns the temperature in °C as measured inside the microcontroller. The value returned is not the ambient temperature!

The temperature is only proportional to the real temperature and it has bad accuracy. Practically it is only useful as an indicator for temperature changes.

BrickHAT@Reset[] → Null

Calling this function will reset the Bricklet. All configurations will be lost.

After a reset you have to create new device objects, calling functions on the existing ones will result in undefined behavior!

BrickHAT@WriteUID[uid] → Null
Parameters:
  • uid -- Integer

Writes a new UID into flash. If you want to set a new UID you have to decode the Base58 encoded UID string into an integer first.

We recommend that you use Brick Viewer to change the UID.

BrickHAT@ReadUID[] → uid
Returns:
  • uid -- Integer

Returns the current UID as an integer. Encode as Base58 to get the usual string version.

BrickHAT@GetIdentity[out uid, out connectedUid, out position, out {hardwareVersion1, hardwareVersion2, hardwareVersion3}, out {firmwareVersion1, firmwareVersion2, firmwareVersion3}, out deviceIdentifier] → Null
Parameters:
  • uid -- String
  • connectedUid -- String
  • position -- Integer
  • hardwareVersioni -- Integer
  • firmwareVersioni -- Integer
  • deviceIdentifier -- Integer

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c' or 'd'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Brick.

Constants

BrickHAT`DEVICEUIDENTIFIER

This constant is used to identify a HAT Brick.

The GetIdentity[] function and the EnumerateCallback callback of the IP Connection have a deviceIdentifier parameter to specify the Brick's or Bricklet's type.

BrickHAT`DEVICEDISPLAYNAME

This constant represents the human readable name of a HAT Brick.