PHP - Piezo Buzzer Bricklet

This is the description of the PHP API bindings for the Piezo Buzzer Bricklet. General information and technical specifications for the Piezo Buzzer Bricklet are summarized in its hardware description.

An installation guide for the PHP API bindings is part of their general description.

Examples

The example code below is Public Domain (CC0 1.0).

Beep

Download (ExampleBeep.php)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
<?php

require_once('Tinkerforge/IPConnection.php');
require_once('Tinkerforge/BrickletPiezoBuzzer.php');

use Tinkerforge\IPConnection;
use Tinkerforge\BrickletPiezoBuzzer;

const HOST = 'localhost';
const PORT = 4223;
const UID = 'XYZ'; // Change XYZ to the UID of your Piezo Buzzer Bricklet

$ipcon = new IPConnection(); // Create IP connection
$pb = new BrickletPiezoBuzzer(UID, $ipcon); // Create device object

$ipcon->connect(HOST, PORT); // Connect to brickd
// Don't use device before ipcon is connected

// Make 2 second beep
$pb->beep(2000);

echo "Press key to exit\n";
fgetc(fopen('php://stdin', 'r'));
$ipcon->disconnect();

?>

Morse Code

Download (ExampleMorseCode.php)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
<?php

require_once('Tinkerforge/IPConnection.php');
require_once('Tinkerforge/BrickletPiezoBuzzer.php');

use Tinkerforge\IPConnection;
use Tinkerforge\BrickletPiezoBuzzer;

const HOST = 'localhost';
const PORT = 4223;
const UID = 'XYZ'; // Change XYZ to the UID of your Piezo Buzzer Bricklet

$ipcon = new IPConnection(); // Create IP connection
$pb = new BrickletPiezoBuzzer(UID, $ipcon); // Create device object

$ipcon->connect(HOST, PORT); // Connect to brickd
// Don't use device before ipcon is connected

// Morse SOS
$pb->morseCode('... --- ...');

echo "Press key to exit\n";
fgetc(fopen('php://stdin', 'r'));
$ipcon->disconnect();

?>

API

Functions that return multiple values return them in an associative array.

Basic Functions

class BrickletPiezoBuzzer(string $uid, IPConnection $ipcon)

Creates an object with the unique device ID $uid:

<?php   $piezo_buzzer = new BrickletPiezoBuzzer('YOUR_DEVICE_UID', $ipcon);   ?>

This object can then be used after the IP Connection is connected (see examples above).

void BrickletPiezoBuzzer::beep(int $duration)

Beeps with the duration in ms. For example: If you set a value of 1000, the piezo buzzer will beep for one second.

void BrickletPiezoBuzzer::morseCode(string $morse)

Sets morse code that will be played by the piezo buzzer. The morse code is given as a string consisting of "." (dot), "-" (minus) and " " (space) for dits, dahs and pauses. Every other character is ignored.

For example: If you set the string "...---...", the piezo buzzer will beep nine times with the durations "short short short long long long short short short".

The maximum string size is 60.

Advanced Functions

array BrickletPiezoBuzzer::getAPIVersion()

Returns the version of the API definition (major, minor, revision) implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

bool BrickletPiezoBuzzer::getResponseExpected(int $function_id)

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by setResponseExpected(). For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

See setResponseExpected() for the list of function ID constants available for this function.

void BrickletPiezoBuzzer::setResponseExpected(int $function_id, bool $response_expected)

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

The following function ID constants are available for this function:

  • BrickletPiezoBuzzer::FUNCTION_BEEP = 1
  • BrickletPiezoBuzzer::FUNCTION_MORSE_CODE = 2
void BrickletPiezoBuzzer::setResponseExpectedAll(bool $response_expected)

Changes the response expected flag for all setter and callback configuration functions of this device at once.

array BrickletPiezoBuzzer::getIdentity()

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c' or 'd'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Bricklet.

The returned array has the keys uid, connected_uid, position, hardware_version, firmware_version and device_identifier.

Callback Configuration Functions

void BrickletPiezoBuzzer::registerCallback(int $callback_id, callable $callback, mixed $user_data=NULL)

Registers the given $function with the given $callback_id. The optional $user_data will be passed as the last parameter to the function.

The available callback IDs with corresponding function signatures are listed below.

Callbacks

Callbacks can be registered to receive time critical or recurring data from the device. The registration is done with the registerCallback() function of the device object. The first parameter is the callback ID and the second parameter the callback function:

<?php

function myCallback($param)
{
    echo $param . "\n";
}

$piezo_buzzer->registerCallback(BrickletPiezoBuzzer::CALLBACK_EXAMPLE, 'myCallback');

?>

The available constants with corresponding function signatures are described below.

Note

Using callbacks for recurring events is always preferred compared to using getters. It will use less USB bandwidth and the latency will be a lot better, since there is no round trip time.

int BrickletPiezoBuzzer::CALLBACK_BEEP_FINISHED
<?php   void callback([mixed $user_data])   ?>

This callback is triggered if a beep set by beep() is finished

int BrickletPiezoBuzzer::CALLBACK_MORSE_CODE_FINISHED
<?php   void callback([mixed $user_data])   ?>

This callback is triggered if the playback of the morse code set by morseCode() is finished.

Constants

int BrickletPiezoBuzzer::DEVICE_IDENTIFIER

This constant is used to identify a Piezo Buzzer Bricklet.

The getIdentity() function and the IPConnection::CALLBACK_ENUMERATE callback of the IP Connection have a deviceIdentifier parameter to specify the Brick's or Bricklet's type.

string BrickletPiezoBuzzer::DEVICE_DISPLAY_NAME

This constant represents the human readable name of a Piezo Buzzer Bricklet.