openHAB - Sound Intensity Bricklet

Bemerkung

Zur Zeit ist nur die englische openHAB-Dokumentation verfügbar.

This is the description of the openHAB API bindings for the Sound Intensity Bricklet. General information and technical specifications for the Sound Intensity Bricklet are summarized in its hardware description.

An installation guide for the openHAB API bindings is part of their general description.

Thing

UID:
  • tinkerforge:brickletsoundintensity:[UID]
Required firmware version:
  • 2.0.0
Firmware update supported:
  • yes
Channels:
Actions:

Channels

Sound Intensity

The current sound intensity. The value has a range of 0 to 4095.

The value corresponds to the upper envelop of the signal of the microphone capsule.

Type:
  • Number:Dimensionless
UID:
  • tinkerforge:brickletsoundintensity:[UID]:BrickletSoundIntensityIntensity
Read only:
  • Yes
Range:
  • 0 to 4095 (Step 1)
Parameters:
  • Update Interval – Type: integer, Default: 1000, Unit: ms, Min: 0, Max: 4294967295
  • Specifies the update interval in milliseconds. A value of 0 disables automatic updates.

Actions

Actions can be used in rules by creating an action object. All actions return a Map<String, Object>. Returned values can be accessed by name, sometimes the type deduction needs some hints, as shown below:

val actions = getActions("tinkerforge", "tinkerforge:brickletsoundintensity:[UID]")
val hwVersion = actions.brickletSoundIntensityGetIdentity().get("hardwareVersion") as short[]
logInfo("Example", "Hardware version: " + hwVersion.get(0) + "." + hwVersion.get(1) + "." + hwVersion.get(2))

Basic Actions

brickletSoundIntensityGetIntensity()
Return Map:
  • intensity – Type: int, Range: [0 to 212 - 1]

Returns the current sound intensity.

The value corresponds to the upper envelop of the signal of the microphone capsule.

If you want to get the intensity periodically, it is recommended to use the Sound Intensity channel and set the period with the configuration of Sound Intensity.

Advanced Actions

brickletSoundIntensityGetIdentity()
Return Map:
  • uid – Type: String, Length: up to 8
  • connectedUid – Type: String, Length: up to 8
  • position – Type: char, Range: ['a' to 'h', 'i', 'z']
  • hardwareVersion – Type: short[], Length: 3
    • 0: major – Type: short, Range: [0 to 255]
    • 1: minor – Type: short, Range: [0 to 255]
    • 2: revision – Type: short, Range: [0 to 255]
  • firmwareVersion – Type: short[], Length: 3
    • 0: major – Type: short, Range: [0 to 255]
    • 1: minor – Type: short, Range: [0 to 255]
    • 2: revision – Type: short, Range: [0 to 255]
  • deviceIdentifier – Type: int, Range: [0 to 216 - 1]

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). The Raspberry Pi HAT (Zero) Brick is always at position 'i' and the Bricklet connected to an Isolator Bricklet is always as position 'z'.

The device identifier numbers can be found here