Java - Industrial Digital In 4 Bricklet¶

Simple¶

Download (ExampleSimple.java)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28

import com.tinkerforge.IPConnection;
import com.tinkerforge.BrickletIndustrialDigitalIn4;

public class ExampleSimple {
    private static final String HOST = "localhost";
    private static final int PORT = 4223;

    // Change XYZ to the UID of your Industrial Digital In 4 Bricklet
    private static final String UID = "XYZ";

    // Note: To make the example code cleaner we do not handle exceptions. Exceptions
    //       you might normally want to catch are described in the documentation
    public static void main(String args[]) throws Exception {
        IPConnection ipcon = new IPConnection(); // Create IP connection
        BrickletIndustrialDigitalIn4 idi4 =
          new BrickletIndustrialDigitalIn4(UID, ipcon); // Create device object

        ipcon.connect(HOST, PORT); // Connect to brickd
        // Don't use device before ipcon is connected

        // Get current value as bitmask
        int valueMask = idi4.getValue(); // Can throw com.tinkerforge.TimeoutException
        System.out.println("Value Mask: " + Integer.toBinaryString(valueMask));

        System.out.println("Press key to exit"); System.in.read();
        ipcon.disconnect();
    }
}

Interrupt¶

Download (ExampleInterrupt.java)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36

import com.tinkerforge.IPConnection;
import com.tinkerforge.BrickletIndustrialDigitalIn4;

public class ExampleInterrupt {
    private static final String HOST = "localhost";
    private static final int PORT = 4223;

    // Change XYZ to the UID of your Industrial Digital In 4 Bricklet
    private static final String UID = "XYZ";

    // Note: To make the example code cleaner we do not handle exceptions. Exceptions
    //       you might normally want to catch are described in the documentation
    public static void main(String args[]) throws Exception {
        IPConnection ipcon = new IPConnection(); // Create IP connection
        BrickletIndustrialDigitalIn4 idi4 =
          new BrickletIndustrialDigitalIn4(UID, ipcon); // Create device object

        ipcon.connect(HOST, PORT); // Connect to brickd
        // Don't use device before ipcon is connected

        // Add interrupt listener
        idi4.addInterruptListener(new BrickletIndustrialDigitalIn4.InterruptListener() {
            public void interrupt(int interruptMask, int valueMask) {
                System.out.println("Interrupt Mask: " + Integer.toBinaryString(interruptMask));
                System.out.println("Value Mask: " + Integer.toBinaryString(valueMask));
                System.out.println("");
            }
        });

        // Enable interrupt on pin 0
        idi4.setInterrupt(1 << 0);

        System.out.println("Press key to exit"); System.in.read();
        ipcon.disconnect();
    }
}

Basic Functions¶

class BrickletIndustrialDigitalIn4(String uid, IPConnection ipcon)¶

Parameters:	uid – Type: String ipcon – Type: IPConnection
Returns:	industrialDigitalIn4 – Type: BrickletIndustrialDigitalIn4

Creates an object with the unique device ID uid:

BrickletIndustrialDigitalIn4 industrialDigitalIn4 = new BrickletIndustrialDigitalIn4("YOUR_DEVICE_UID", ipcon);

This object can then be used after the IP Connection is connected.

int BrickletIndustrialDigitalIn4.getValue()¶

Returns:	valueMask – Type: int, Range: [0 to 216 - 1]

Returns the input value with a bitmask. The bitmask is 16bit long, true refers to high and false refers to low.

For example: The value 3 or 0b0011 means that pins 0-1 are high and the other pins are low.

If no groups are used (see setGroup()), the pins correspond to the markings on the IndustrialDigital In 4 Bricklet.

If groups are used, the pins correspond to the element in the group. Element 1 in the group will get pins 0-3, element 2 pins 4-7, element 3 pins 8-11 and element 4 pins 12-15.

long BrickletIndustrialDigitalIn4.getEdgeCount(short pin, boolean resetCounter)¶

Parameters:	pin – Type: short, Range: [0 to 3] resetCounter – Type: boolean
Returns:	count – Type: long, Range: [0 to 232 - 1]

Returns the current value of the edge counter for the selected pin. You can configure the edges that are counted with setEdgeCountConfig().

If you set the reset counter to true, the count is set back to 0 directly after it is read.

The edge counters use the grouping as set by setGroup().

New in version 2.0.1 (Plugin).

Advanced Functions¶

void BrickletIndustrialDigitalIn4.setGroup(char[] group)¶

Parameters:	group – Type: char[], Length: 4, Range: ['a' to 'd', 'n']

Sets a group of Digital In 4 Bricklets that should work together. You can find Bricklets that can be grouped together with getAvailableForGroup().

The group consists of 4 elements. Element 1 in the group will get pins 0-3, element 2 pins 4-7, element 3 pins 8-11 and element 4 pins 12-15.

Each element can either be one of the ports ('a' to 'd') or 'n' if it should not be used.

For example: If you have two Digital In 4 Bricklets connected to port A and port B respectively, you could call with ['a', 'b', 'n', 'n'].

Now the pins on the Digital In 4 on port A are assigned to 0-3 and the pins on the Digital In 4 on port B are assigned to 4-7. It is now possible to call getValue() and read out two Bricklets at the same time.

Changing the group configuration resets all edge counter configurations and values.

char[] BrickletIndustrialDigitalIn4.getGroup()¶

Returns:	group – Type: char[], Length: 4, Range: ['a' to 'd', 'n']

Returns the group as set by setGroup()

short BrickletIndustrialDigitalIn4.getAvailableForGroup()¶

Returns:	available – Type: short, Range: [0 to 15]

Returns a bitmask of ports that are available for grouping. For example the value 5 or 0b0101 means: Port A and port C are connected to Bricklets that can be grouped together.

void BrickletIndustrialDigitalIn4.setEdgeCountConfig(int selectionMask, short edgeType, short debounce)¶

Parameters:	selectionMask – Type: int, Range: [0 to 216 - 1] edgeType – Type: short, Range: See constants, Default: 0 debounce – Type: short, Unit: 1 ms, Range: [0 to 255], Default: 100

Configures the edge counter for the selected pins. A bitmask of 9 or 0b1001 will enable the edge counter for pins 0 and 3.

The edge type parameter configures if rising edges, falling edges or both are counted if the pin is configured for input. Possible edge types are:

• 0 = rising
• 1 = falling
• 2 = both

Configuring an edge counter resets its value to 0.

If you don't know what any of this means, just leave it at default. The default configuration is very likely OK for you.

The edge counters use the grouping as set by setGroup().

The following constants are available for this function:

For edgeType:

• BrickletIndustrialDigitalIn4.EDGE_TYPE_RISING = 0
• BrickletIndustrialDigitalIn4.EDGE_TYPE_FALLING = 1
• BrickletIndustrialDigitalIn4.EDGE_TYPE_BOTH = 2

New in version 2.0.1 (Plugin).

BrickletIndustrialDigitalIn4.EdgeCountConfig BrickletIndustrialDigitalIn4.getEdgeCountConfig(short pin)¶

Parameters:	pin – Type: short, Range: [0 to 255]
Return Object:	edgeType – Type: short, Range: See constants, Default: 0 debounce – Type: short, Unit: 1 ms, Range: [0 to 255], Default: 100

Returns the edge type and debounce time for the selected pin as set by setEdgeCountConfig().

The following constants are available for this function:

For edgeType:

• BrickletIndustrialDigitalIn4.EDGE_TYPE_RISING = 0
• BrickletIndustrialDigitalIn4.EDGE_TYPE_FALLING = 1
• BrickletIndustrialDigitalIn4.EDGE_TYPE_BOTH = 2

New in version 2.0.1 (Plugin).

BrickletIndustrialDigitalIn4.Identity BrickletIndustrialDigitalIn4.getIdentity()¶

Return Object:

uid – Type: String, Length: up to 8 connectedUid – Type: String, Length: up to 8 position – Type: char, Range: ['a' to 'h', 'z'] hardwareVersion – Type: short[], Length: 3 0: major – Type: short, Range: [0 to 255] 1: minor – Type: short, Range: [0 to 255] 2: revision – Type: short, Range: [0 to 255] firmwareVersion – Type: short[], Length: 3 0: major – Type: short, Range: [0 to 255] 1: minor – Type: short, Range: [0 to 255] 2: revision – Type: short, Range: [0 to 255] deviceIdentifier – Type: int, Range: [0 to 216 - 1]

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). A Bricklet connected to an Isolator Bricklet is always at position 'z'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Bricklet.

Listener Configuration Functions¶

void BrickletIndustrialDigitalIn4.setDebouncePeriod(long debounce)¶

Parameters:	debounce – Type: long, Unit: 1 ms, Range: [0 to 232 - 1], Default: 100

Sets the debounce period of the InterruptListener listener.

For example: If you set this value to 100, you will get the interrupt maximal every 100ms. This is necessary if something that bounces is connected to the Digital In 4 Bricklet, such as a button.

long BrickletIndustrialDigitalIn4.getDebouncePeriod()¶

Returns:	debounce – Type: long, Unit: 1 ms, Range: [0 to 232 - 1], Default: 100

Returns the debounce period as set by setDebouncePeriod().

void BrickletIndustrialDigitalIn4.setInterrupt(int interruptMask)¶

Parameters:	interruptMask – Type: int, Range: [0 to 216 - 1]

Sets the pins on which an interrupt is activated with a bitmask. Interrupts are triggered on changes of the voltage level of the pin, i.e. changes from high to low and low to high.

For example: An interrupt bitmask of 9 or 0b1001 will enable the interrupt for pins 0 and 3.

The interrupts use the grouping as set by setGroup().

The interrupt is delivered with the InterruptListener listener.

int BrickletIndustrialDigitalIn4.getInterrupt()¶

Returns:	interruptMask – Type: int, Range: [0 to 216 - 1]

Returns the interrupt bitmask as set by setInterrupt().

Listeners¶

Listeners can be registered to receive time critical or recurring data from the device. The registration is done with add*Listener() functions of the device object.

The parameter is a listener class object, for example:

device.addExampleListener(new BrickletIndustrialDigitalIn4.ExampleListener() {
    public void property(int value) {
        System.out.println("Value: " + value);
    }
});

The available listener classes with inherent methods to be overwritten are described below. It is possible to add several listeners and to remove them with the corresponding remove*Listener() function.

class BrickletIndustrialDigitalIn4.InterruptListener()¶

This listener can be added with the addInterruptListener() function. An added listener can be removed with the removeInterruptListener() function.

void interrupt(int interruptMask, int valueMask)

Parameters:	interruptMask – Type: int, Range: [0 to 216 - 1] valueMask – Type: int, Range: [0 to 216 - 1]

This listener is triggered whenever a change of the voltage level is detected on pins where the interrupt was activated with setInterrupt().

The values are a bitmask that specifies which interrupts occurred and the current value bitmask.

For example:

• (1, 1) or (0b0001, 0b0001) means that an interrupt on pin 0 occurred and currently pin 0 is high and pins 1-3 are low.
• (9, 14) or (0b1001, 0b1110) means that interrupts on pins 0 and 3 occurred and currently pin 0 is low and pins 1-3 are high.

The interrupts use the grouping as set by setGroup().

Virtual Functions¶

Virtual functions don't communicate with the device itself, but operate only on the API bindings device object. They can be called without the corresponding IP Connection object being connected.

short[] BrickletIndustrialDigitalIn4.getAPIVersion()¶

Return Object:	apiVersion – Type: short[], Length: 3 0: major – Type: short, Range: [0 to 255] 1: minor – Type: short, Range: [0 to 255] 2: revision – Type: short, Range: [0 to 255]

Returns the version of the API definition implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

boolean BrickletIndustrialDigitalIn4.getResponseExpected(byte functionId)¶

Parameters:	functionId – Type: byte, Range: See constants
Returns:	responseExpected – Type: boolean

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For listener configuration functions it is enabled by default too, but can be disabled by setResponseExpected(). For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For functionId:

• BrickletIndustrialDigitalIn4.FUNCTION_SET_GROUP = 2
• BrickletIndustrialDigitalIn4.FUNCTION_SET_DEBOUNCE_PERIOD = 5
• BrickletIndustrialDigitalIn4.FUNCTION_SET_INTERRUPT = 7
• BrickletIndustrialDigitalIn4.FUNCTION_SET_EDGE_COUNT_CONFIG = 11

void BrickletIndustrialDigitalIn4.setResponseExpected(byte functionId, boolean responseExpected)¶

Parameters:	functionId – Type: byte, Range: See constants responseExpected – Type: boolean

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and listener configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For functionId:

• BrickletIndustrialDigitalIn4.FUNCTION_SET_GROUP = 2
• BrickletIndustrialDigitalIn4.FUNCTION_SET_DEBOUNCE_PERIOD = 5
• BrickletIndustrialDigitalIn4.FUNCTION_SET_INTERRUPT = 7
• BrickletIndustrialDigitalIn4.FUNCTION_SET_EDGE_COUNT_CONFIG = 11

void BrickletIndustrialDigitalIn4.setResponseExpectedAll(boolean responseExpected)¶

Parameters:	responseExpected – Type: boolean

Changes the response expected flag for all setter and listener configuration functions of this device at once.

Constants¶

int BrickletIndustrialDigitalIn4.DEVICE_IDENTIFIER¶

This constant is used to identify a Industrial Digital In 4 Bricklet.

The getIdentity() function and the IPConnection.EnumerateListener listener of the IP Connection have a deviceIdentifier parameter to specify the Brick's or Bricklet's type.

String BrickletIndustrialDigitalIn4.DEVICE_DISPLAY_NAME¶

This constant represents the human readable name of a Industrial Digital In 4 Bricklet.