Mathematica - Industrial Dual 0-20mA Bricklet

This is the description of the Mathematica API bindings for the Industrial Dual 0-20mA Bricklet. General information and technical specifications for the Industrial Dual 0-20mA Bricklet are summarized in its hardware description.

An installation guide for the Mathematica API bindings is part of their general description.

Examples

The example code below is Public Domain (CC0 1.0).

Simple

Download (ExampleSimple.nb)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
Needs["NETLink`"]
LoadNETAssembly["Tinkerforge",NotebookDirectory[]<>"../../.."]

host="localhost"
port=4223
uid="XYZ"(*Change XYZ to the UID of your Industrial Dual 0-20mA Bricklet*)

(*Create IPConnection and device object*)
ipcon=NETNew["Tinkerforge.IPConnection"]
id020=NETNew["Tinkerforge.BrickletIndustrialDual020mA",uid,ipcon]
ipcon@Connect[host,port]

(*Get current current from sensor 1*)
Print["Current (Sensor 1): "<>ToString[N[Quantity[id020@GetCurrent[1],"mA/1000000"]]]]

(*Clean up*)
ipcon@Disconnect[]
ReleaseNETObject[id020]
ReleaseNETObject[ipcon]

Callback

Download (ExampleCallback.nb)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Needs["NETLink`"]
LoadNETAssembly["Tinkerforge",NotebookDirectory[]<>"../../.."]

host="localhost"
port=4223
uid="XYZ"(*Change XYZ to the UID of your Industrial Dual 0-20mA Bricklet*)

(*Create IPConnection and device object*)
ipcon=NETNew["Tinkerforge.IPConnection"]
id020=NETNew["Tinkerforge.BrickletIndustrialDual020mA",uid,ipcon]
ipcon@Connect[host,port]

(*Callback function for current callback*)
CurrentCB[sender_,sensor_,current_]:=
 Module[{},
  Print["Sensor: "<>ToString[sensor]];
  Print["Current: "<>ToString[N[Quantity[current,"mA/1000000"]]]]
 ]

AddEventHandler[id020@CurrentCallback,CurrentCB]

(*Set period for current (sensor 1) callback to 1s (1000ms)*)
(*Note: The current (sensor 1) callback is only called every second*)
(*if the current (sensor 1) has changed since the last call!*)
id020@SetCurrentCallbackPeriod[1,1000]

Input["Click OK to exit"]

(*Clean up*)
ipcon@Disconnect[]
ReleaseNETObject[id020]
ReleaseNETObject[ipcon]

Threshold

Download (ExampleThreshold.nb)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Needs["NETLink`"]
LoadNETAssembly["Tinkerforge",NotebookDirectory[]<>"../../.."]

host="localhost"
port=4223
uid="XYZ"(*Change XYZ to the UID of your Industrial Dual 0-20mA Bricklet*)

(*Create IPConnection and device object*)
ipcon=NETNew["Tinkerforge.IPConnection"]
id020=NETNew["Tinkerforge.BrickletIndustrialDual020mA",uid,ipcon]
ipcon@Connect[host,port]

(*Get threshold callbacks with a debounce time of 10 seconds (10000ms)*)
id020@SetDebouncePeriod[10000]

(*Callback function for current reached callback*)
CurrentReachedCB[sender_,sensor_,current_]:=
 Module[{},
  Print["Sensor: "<>ToString[sensor]];
  Print["Current: "<>ToString[N[Quantity[current,"mA/1000000"]]]]
 ]

AddEventHandler[id020@CurrentReachedCallback,CurrentReachedCB]

(*Configure threshold for current (sensor 1) "greater than 10 mA"*)
option=Tinkerforge`BrickletIndustrialDual020mA`THRESHOLDUOPTIONUGREATER
id020@SetCurrentCallbackThreshold[1,option,10*1000000,0]

Input["Click OK to exit"]

(*Clean up*)
ipcon@Disconnect[]
ReleaseNETObject[id020]
ReleaseNETObject[ipcon]

API

Generally, every method of the Mathematica bindings that returns a value can throw a Tinkerforge.TimeoutException. This exception gets thrown if the device did not respond. If a cable based connection is used, it is unlikely that this exception gets thrown (assuming nobody plugs the device out). However, if a wireless connection is used, timeouts will occur if the distance to the device gets too big.

Since .NET/Link does not support multiple return values directly, we use the out keyword to return multiple values from a method. For further information about the out keyword in .NET/Link see the corresponding Mathematica .NET/Link documentation.

The namespace for all Brick/Bricklet bindings and the IPConnection is Tinkerforge.*.

Two sensors can be connected to the Bricklet. Functions that are related directly to a sensor have a sensor parameter to specify one of the two sensors. Valid values for the sensor parameter are 0 and 1.

Basic Functions

BrickletIndustrialDual020mA[uid, ipcon] → industrialDual020mA
Parameters:
  • uid -- String
  • ipcon -- NETObject[IPConnection]
Returns:
  • industrialDual020mA -- NETObject[BrickletIndustrialDual020mA]

Creates an object with the unique device ID uid:

industrialDual020mA=NETNew["Tinkerforge.BrickletIndustrialDual020mA","YOUR_DEVICE_UID",ipcon]

This object can then be used after the IP Connection is connected (see examples above).

The .NET runtime has built-in garbage collection that frees objects that are no longer in use by a program. But because Mathematica can not automatically tell when a Mathematica "program" doesn't use a .NET object anymore, this has to be done by the program. For this the ReleaseNETObject[] function is used in the examples.

For further information about object management in .NET/Link see the corresponding Mathematica .NET/Link documentation.

BrickletIndustrialDual020mA@GetCurrent[sensor] → current
Parameters:
  • sensor -- Integer
Returns:
  • current -- Integer

Returns the current of the specified sensor (0 or 1). The value is in nA and between 0nA and 22505322nA (22.5mA).

It is possible to detect if an IEC 60381-1 compatible sensor is connected and if it works probably.

If the returned current is below 4mA, there is likely no sensor connected or the sensor may be defect. If the returned current is over 20mA, there might be a short circuit or the sensor may be defect.

If you want to get the current periodically, it is recommended to use the CurrentCallback callback and set the period with SetCurrentCallbackPeriod[].

Advanced Functions

BrickletIndustrialDual020mA@SetSampleRate[rate] → Null
Parameters:
  • rate -- Integer

Sets the sample rate to either 240, 60, 15 or 4 samples per second. The resolution for the rates is 12, 14, 16 and 18 bit respectively.

Value Description
0 240 samples per second, 12 bit resolution
1 60 samples per second, 14 bit resolution
2 15 samples per second, 16 bit resolution
3 4 samples per second, 18 bit resolution

The default value is 3 (4 samples per second with 18 bit resolution).

The following constants are available for this function:

  • BrickletIndustrialDual020mA`SAMPLEURATEU240USPS = 0
  • BrickletIndustrialDual020mA`SAMPLEURATEU60USPS = 1
  • BrickletIndustrialDual020mA`SAMPLEURATEU15USPS = 2
  • BrickletIndustrialDual020mA`SAMPLEURATEU4USPS = 3
BrickletIndustrialDual020mA@GetSampleRate[] → rate
Returns:
  • rate -- Integer

Returns the sample rate as set by SetSampleRate[].

The following constants are available for this function:

  • BrickletIndustrialDual020mA`SAMPLEURATEU240USPS = 0
  • BrickletIndustrialDual020mA`SAMPLEURATEU60USPS = 1
  • BrickletIndustrialDual020mA`SAMPLEURATEU15USPS = 2
  • BrickletIndustrialDual020mA`SAMPLEURATEU4USPS = 3
BrickletIndustrialDual020mA@GetAPIVersion[] → {apiVersion1, apiVersion2, apiVersion3}
Returns:
  • apiVersioni -- Integer

Returns the version of the API definition (major, minor, revision) implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

BrickletIndustrialDual020mA@GetResponseExpected[functionId] → responseExpected
Parameters:
  • functionId -- Integer
Returns:
  • responseExpected -- True/False

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by SetResponseExpected[]. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

See SetResponseExpected[] for the list of function ID constants available for this function.

BrickletIndustrialDual020mA@SetResponseExpected[functionId, responseExpected] → Null
Parameters:
  • functionId -- Integer
  • responseExpected -- True/False

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

The following function ID constants are available for this function:

  • BrickletIndustrialDual020mA`FUNCTIONUSETUCURRENTUCALLBACKUPERIOD = 2
  • BrickletIndustrialDual020mA`FUNCTIONUSETUCURRENTUCALLBACKUTHRESHOLD = 4
  • BrickletIndustrialDual020mA`FUNCTIONUSETUDEBOUNCEUPERIOD = 6
  • BrickletIndustrialDual020mA`FUNCTIONUSETUSAMPLEURATE = 8
BrickletIndustrialDual020mA@SetResponseExpectedAll[responseExpected] → Null
Parameters:
  • responseExpected -- True/False

Changes the response expected flag for all setter and callback configuration functions of this device at once.

BrickletIndustrialDual020mA@GetIdentity[out uid, out connectedUid, out position, out {hardwareVersion1, hardwareVersion2, hardwareVersion3}, out {firmwareVersion1, firmwareVersion2, firmwareVersion3}, out deviceIdentifier] → Null
Parameters:
  • uid -- String
  • connectedUid -- String
  • position -- Integer
  • hardwareVersioni -- Integer
  • firmwareVersioni -- Integer
  • deviceIdentifier -- Integer

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c' or 'd'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Bricklet.

Callback Configuration Functions

BrickletIndustrialDual020mA@SetCurrentCallbackPeriod[sensor, period] → Null
Parameters:
  • sensor -- Integer
  • period -- Integer

Sets the period in ms with which the CurrentCallback callback is triggered periodically for the given sensor. A value of 0 turns the callback off.

The CurrentCallback callback is only triggered if the current has changed since the last triggering.

The default value is 0.

BrickletIndustrialDual020mA@GetCurrentCallbackPeriod[sensor] → period
Parameters:
  • sensor -- Integer
Returns:
  • period -- Integer

Returns the period as set by SetCurrentCallbackPeriod[].

BrickletIndustrialDual020mA@SetCurrentCallbackThreshold[sensor, option, min, max] → Null
Parameters:
  • sensor -- Integer
  • option -- Integer
  • min -- Integer
  • max -- Integer

Sets the thresholds for the CurrentReachedCallback callback for the given sensor.

The following options are possible:

Option Description
'x' Callback is turned off
'o' Callback is triggered when the current is outside the min and max values
'i' Callback is triggered when the current is inside the min and max values
'<' Callback is triggered when the current is smaller than the min value (max is ignored)
'>' Callback is triggered when the current is greater than the min value (max is ignored)

The default value is ('x', 0, 0).

The following constants are available for this function:

  • BrickletIndustrialDual020mA`THRESHOLDUOPTIONUOFF = ToCharacterCode["x"][[0]]
  • BrickletIndustrialDual020mA`THRESHOLDUOPTIONUOUTSIDE = ToCharacterCode["o"][[0]]
  • BrickletIndustrialDual020mA`THRESHOLDUOPTIONUINSIDE = ToCharacterCode["i"][[0]]
  • BrickletIndustrialDual020mA`THRESHOLDUOPTIONUSMALLER = ToCharacterCode["<"][[0]]
  • BrickletIndustrialDual020mA`THRESHOLDUOPTIONUGREATER = ToCharacterCode[">"][[0]]
BrickletIndustrialDual020mA@GetCurrentCallbackThreshold[sensor, out option, out min, out max] → Null
Parameters:
  • sensor -- Integer
  • option -- Integer
  • min -- Integer
  • max -- Integer

Returns the threshold as set by SetCurrentCallbackThreshold[].

The following constants are available for this function:

  • BrickletIndustrialDual020mA`THRESHOLDUOPTIONUOFF = ToCharacterCode["x"][[0]]
  • BrickletIndustrialDual020mA`THRESHOLDUOPTIONUOUTSIDE = ToCharacterCode["o"][[0]]
  • BrickletIndustrialDual020mA`THRESHOLDUOPTIONUINSIDE = ToCharacterCode["i"][[0]]
  • BrickletIndustrialDual020mA`THRESHOLDUOPTIONUSMALLER = ToCharacterCode["<"][[0]]
  • BrickletIndustrialDual020mA`THRESHOLDUOPTIONUGREATER = ToCharacterCode[">"][[0]]
BrickletIndustrialDual020mA@SetDebouncePeriod[debounce] → Null
Parameters:
  • debounce -- Integer

Sets the period in ms with which the threshold callback

is triggered, if the threshold

keeps being reached.

The default value is 100.

BrickletIndustrialDual020mA@GetDebouncePeriod[] → debounce
Returns:
  • debounce -- Integer

Returns the debounce period as set by SetDebouncePeriod[].

Callbacks

Callbacks can be registered to receive time critical or recurring data from the device. The registration is done by assigning a function to a callback property of the device object:

MyCallback[sender_,value_]:=Print["Value: "<>ToString[value]]

AddEventHandler[industrialDual020mA@ExampleCallback,MyCallback]

For further information about event handling using .NET/Link see the corresponding Mathematica .NET/Link documentation.

The available callback property and their type of parameters are described below.

Note

Using callbacks for recurring events is always preferred compared to using getters. It will use less USB bandwidth and the latency will be a lot better, since there is no round trip time.

event BrickletIndustrialDual020mA@CurrentCallback[sender, sensor, current]
Parameters:
  • sender -- NETObject[BrickletIndustrialDual020mA]
  • sensor -- Integer
  • current -- Integer

This callback is triggered periodically with the period that is set by SetCurrentCallbackPeriod[]. The parameter is the current of the sensor.

The CurrentCallback callback is only triggered if the current has changed since the last triggering.

event BrickletIndustrialDual020mA@CurrentReachedCallback[sender, sensor, current]
Parameters:
  • sender -- NETObject[BrickletIndustrialDual020mA]
  • sensor -- Integer
  • current -- Integer

This callback is triggered when the threshold as set by SetCurrentCallbackThreshold[] is reached. The parameter is the current of the sensor.

If the threshold keeps being reached, the callback is triggered periodically with the period as set by SetDebouncePeriod[].

Constants

BrickletIndustrialDual020mA`DEVICEUIDENTIFIER

This constant is used to identify a Industrial Dual 0-20mA Bricklet.

The GetIdentity[] function and the EnumerateCallback callback of the IP Connection have a deviceIdentifier parameter to specify the Brick's or Bricklet's type.

BrickletIndustrialDual020mA`DEVICEDISPLAYNAME

This constant represents the human readable name of a Industrial Dual 0-20mA Bricklet.