Mathematica - Segment Display 4x7 Bricklet

This is the description of the Mathematica API bindings for the Segment Display 4x7 Bricklet. General information and technical specifications for the Segment Display 4x7 Bricklet are summarized in its hardware description.

An installation guide for the Mathematica API bindings is part of their general description.

Examples

The example code below is Public Domain (CC0 1.0).

Simple

Download (ExampleSimple.nb)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
Needs["NETLink`"]
LoadNETAssembly["Tinkerforge",NotebookDirectory[]<>"../../.."]

host="localhost"
port=4223
uid="XYZ"(*Change XYZ to the UID of your Segment Display 4x7 Bricklet*)

(*0~9,A,b,C,d,E,F*)
digits={63,6,91,79,102,109,125,7,127,111,119,124,57,94,121,113}

(*Create IPConnection and device object*)
ipcon=NETNew["Tinkerforge.IPConnection"]
sd=NETNew["Tinkerforge.BrickletSegmentDisplay4x7",uid,ipcon]
ipcon@Connect[host,port]

(*Write "4223" to the display with full brightness without colon*)
sd@SetSegments[{digits[[4+1]],digits[[2+1]],digits[[2+1]],digits[[3+1]]},7,False]

(*Clean up*)
ipcon@Disconnect[]
ReleaseNETObject[sd]
ReleaseNETObject[ipcon]

API

Generally, every function of the Mathematica bindings that returns a value can throw a Tinkerforge.TimeoutException. This exception gets thrown if the device did not respond. If a cable based connection is used, it is unlikely that this exception gets thrown (assuming nobody plugs the device out). However, if a wireless connection is used, timeouts will occur if the distance to the device gets too big.

Since .NET/Link does not support multiple return values directly, we use the out keyword to return multiple values from a function. For further information about the out keyword in .NET/Link see the corresponding Mathematica .NET/Link documentation.

The namespace for all Brick/Bricklet bindings and the IPConnection is Tinkerforge.*.

Basic Functions

BrickletSegmentDisplay4x7[uid, ipcon] → segmentDisplay4x7
Parameters:
  • uid – Type: String
  • ipcon – Type: NETObject[IPConnection]
Returns:
  • segmentDisplay4x7 – Type: NETObject[BrickletSegmentDisplay4x7]

Creates an object with the unique device ID uid:

segmentDisplay4x7=NETNew["Tinkerforge.BrickletSegmentDisplay4x7","YOUR_DEVICE_UID",ipcon]

This object can then be used after the IP Connection is connected.

The .NET runtime has built-in garbage collection that frees objects that are no longer in use by a program. But because Mathematica can not automatically tell when a Mathematica "program" doesn't use a .NET object anymore, this has to be done by the program. For this the ReleaseNETObject[] function is used in the examples.

For further information about object management in .NET/Link see the corresponding Mathematica .NET/Link documentation.

BrickletSegmentDisplay4x7@SetSegments[{segments1, segments2, segments3, segments4}, brightness, colon] → Null
Parameters:
  • segmentsi – Type: Integer, Range: [0 to 127]
  • brightness – Type: Integer, Range: [0 to 7]
  • colon – Type: True/False

The 7-segment display can be set with bitmaps. Every bit controls one segment:

Bit order of one segment

For example to set a "5" you would want to activate segments 0, 2, 3, 5 and 6. This is represented by the number 0b01101101 = 0x6d = 109.

The brightness can be set between 0 (dark) and 7 (bright). The colon parameter turns the colon of the display on or off.

BrickletSegmentDisplay4x7@GetSegments[out {segments1, segments2, segments3, segments4}, out brightness, out colon] → Null
Output Parameters:
  • segmentsi – Type: Integer, Range: [0 to 127]
  • brightness – Type: Integer, Range: [0 to 7]
  • colon – Type: True/False

Returns the segment, brightness and color data as set by SetSegments[].

Advanced Functions

BrickletSegmentDisplay4x7@StartCounter[valueFrom, valueTo, increment, length] → Null
Parameters:
  • valueFrom – Type: Integer, Range: [-999 to 9999]
  • valueTo – Type: Integer, Range: [-999 to 9999]
  • increment – Type: Integer, Range: [-999 to 9999]
  • length – Type: Integer, Unit: 1 ms, Range: [0 to 232 - 1]

Starts a counter with the from value that counts to the to value with the each step incremented by increment. length is the pause between each increment.

Example: If you set from to 0, to to 100, increment to 1 and length to 1000, a counter that goes from 0 to 100 with one second pause between each increment will be started.

Using a negative increment allows to count backwards.

You can stop the counter at every time by calling SetSegments[].

BrickletSegmentDisplay4x7@GetCounterValue[] → value
Returns:
  • value – Type: Integer, Range: [-999 to 9999]

Returns the counter value that is currently shown on the display.

If there is no counter running a 0 will be returned.

BrickletSegmentDisplay4x7@GetIdentity[out uid, out connectedUid, out position, out {hardwareVersion1, hardwareVersion2, hardwareVersion3}, out {firmwareVersion1, firmwareVersion2, firmwareVersion3}, out deviceIdentifier] → Null
Output Parameters:
  • uid – Type: String, Length: up to 8
  • connectedUid – Type: String, Length: up to 8
  • position – Type: Integer, Range: [ToCharacterCode["a"][[0]] to ToCharacterCode["h"][[0]], ToCharacterCode["z"][[0]]]
  • hardwareVersioni – Type: Integer
    • 1: major – Type: Integer, Range: [0 to 255]
    • 2: minor – Type: Integer, Range: [0 to 255]
    • 3: revision – Type: Integer, Range: [0 to 255]
  • firmwareVersioni – Type: Integer
    • 1: major – Type: Integer, Range: [0 to 255]
    • 2: minor – Type: Integer, Range: [0 to 255]
    • 3: revision – Type: Integer, Range: [0 to 255]
  • deviceIdentifier – Type: Integer, Range: [0 to 216 - 1]

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). A Bricklet connected to an Isolator Bricklet is always at position 'z'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Bricklet.

Callbacks

Callbacks can be registered to receive time critical or recurring data from the device. The registration is done by assigning a function to a callback property of the device object:

MyCallback[sender_,value_]:=Print["Value: "<>ToString[value]]

AddEventHandler[segmentDisplay4x7@ExampleCallback,MyCallback]

For further information about event handling using .NET/Link see the corresponding Mathematica .NET/Link documentation.

The available callback property and their type of parameters are described below.

Note

Using callbacks for recurring events is always preferred compared to using getters. It will use less USB bandwidth and the latency will be a lot better, since there is no round trip time.

event BrickletSegmentDisplay4x7@CounterFinishedCallback[sender]
Callback Parameters:
  • sender – Type: NETObject[BrickletSegmentDisplay4x7]

This callback is triggered when the counter (see StartCounter[]) is finished.

Virtual Functions

Virtual functions don't communicate with the device itself, but operate only on the API bindings device object. They can be called without the corresponding IP Connection object being connected.

BrickletSegmentDisplay4x7@GetAPIVersion[] → {apiVersion1, apiVersion2, apiVersion3}
Output Parameters:
  • apiVersioni – Type: Integer
    • 1: major – Type: Integer, Range: [0 to 255]
    • 2: minor – Type: Integer, Range: [0 to 255]
    • 3: revision – Type: Integer, Range: [0 to 255]

Returns the version of the API definition implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

BrickletSegmentDisplay4x7@GetResponseExpected[functionId] → responseExpected
Parameters:
  • functionId – Type: Integer, Range: See constants
Returns:
  • responseExpected – Type: True/False

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by SetResponseExpected[]. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For functionId:

  • BrickletSegmentDisplay4x7`FUNCTIONUSETUSEGMENTS = 1
  • BrickletSegmentDisplay4x7`FUNCTIONUSTARTUCOUNTER = 3
BrickletSegmentDisplay4x7@SetResponseExpected[functionId, responseExpected] → Null
Parameters:
  • functionId – Type: Integer, Range: See constants
  • responseExpected – Type: True/False

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For functionId:

  • BrickletSegmentDisplay4x7`FUNCTIONUSETUSEGMENTS = 1
  • BrickletSegmentDisplay4x7`FUNCTIONUSTARTUCOUNTER = 3
BrickletSegmentDisplay4x7@SetResponseExpectedAll[responseExpected] → Null
Parameters:
  • responseExpected – Type: True/False

Changes the response expected flag for all setter and callback configuration functions of this device at once.

Constants

BrickletSegmentDisplay4x7`DEVICEUIDENTIFIER

This constant is used to identify a Segment Display 4x7 Bricklet.

The GetIdentity[] function and the IPConnection@EnumerateCallback callback of the IP Connection have a deviceIdentifier parameter to specify the Brick's or Bricklet's type.

BrickletSegmentDisplay4x7`DEVICEDISPLAYNAME

This constant represents the human readable name of a Segment Display 4x7 Bricklet.