JavaScript - IO-16 Bricklet 2.0

This is the description of the JavaScript API bindings for the IO-16 Bricklet 2.0. General information and technical specifications for the IO-16 Bricklet 2.0 are summarized in its hardware description.

An installation guide for the JavaScript API bindings is part of their general description.

Examples

The example code below is Public Domain (CC0 1.0).

Output (Node.js)

Download (ExampleOutput.js)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
var Tinkerforge = require('tinkerforge');

var HOST = 'localhost';
var PORT = 4223;
var UID = 'XYZ'; // Change XYZ to the UID of your IO-16 Bricklet 2.0

var ipcon = new Tinkerforge.IPConnection(); // Create IP connection
var io = new Tinkerforge.BrickletIO16V2(UID, ipcon); // Create device object

ipcon.connect(HOST, PORT,
    function (error) {
        console.log('Error: ' + error);
    }
); // Connect to brickd
// Don't use device before ipcon is connected

ipcon.on(Tinkerforge.IPConnection.CALLBACK_CONNECTED,
    function (connectReason) {
        // Configure channel 7 as output low
        io.setConfiguration(7, 'o', false);

        // Set channel 7 alternating high/low 10 times with 100 ms delay
        for(var i = 0; i < 10; ++i) {
            setTimeout(function () {
                io.setSelectedValue(7, true);
            }, 200 * i + 100);
            setTimeout(function () {
                io.setSelectedValue(7, false);
            }, 200 * i + 200);
        }
    }
);

console.log('Press key to exit');
process.stdin.on('data',
    function (data) {
        ipcon.disconnect();
        process.exit(0);
    }
);

Interrupt (Node.js)

Download (ExampleInterrupt.js)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
var Tinkerforge = require('tinkerforge');

var HOST = 'localhost';
var PORT = 4223;
var UID = 'XYZ'; // Change XYZ to the UID of your IO-16 Bricklet 2.0

var ipcon = new Tinkerforge.IPConnection(); // Create IP connection
var io = new Tinkerforge.BrickletIO16V2(UID, ipcon); // Create device object

ipcon.connect(HOST, PORT,
    function (error) {
        console.log('Error: ' + error);
    }
); // Connect to brickd
// Don't use device before ipcon is connected

ipcon.on(Tinkerforge.IPConnection.CALLBACK_CONNECTED,
    function (connectReason) {
        // Set period for input value (channel 4) callback to 0.5s (500ms)
        io.setInputValueCallbackConfiguration(4, 500, false);
    }
);

// Register input value callback
io.on(Tinkerforge.BrickletIO16V2.CALLBACK_INPUT_VALUE,
    // Callback function for input value callback
    function (channel, changed, value) {
        console.log('Channel: ' + channel);
        console.log('Changed: ' + changed);
        console.log('Value: ' + value);
        console.log();
    }
);

console.log('Press key to exit');
process.stdin.on('data',
    function (data) {
        ipcon.disconnect();
        process.exit(0);
    }
);

Output (HTML)

Download (ExampleOutput.html), Test (ExampleOutput.html)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
<!DOCTYPE html>
<html>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <head>
        <title>Tinkerforge | JavaScript Example</title>
    </head>
    <body>
        <div style="text-align:center;">
            <h1>IO-16 Bricklet 2.0 Output Example</h1>
            <p>
                <input value="localhost" id="host" type="text" size="20">:
                <input value="4280" id="port" type="text" size="5">,
                <input value="uid" id="uid" type="text" size="5">
                <input value="Start Example" id="start" type="button" onclick="startExample();">
            </p>
            <p>
                <textarea readonly id="text" cols="80" rows="24" style="resize:none;"
                          >Press "Start Example" to begin ...</textarea>
            </p>
        </div>
        <script src="./Tinkerforge.js" type='text/javascript'></script>
        <script type='text/javascript'>
            var ipcon;
            var textArea = document.getElementById("text");
            function startExample() {
                textArea.value = "";
                var HOST = document.getElementById("host").value;
                var PORT = parseInt(document.getElementById("port").value);
                var UID = document.getElementById("uid").value;
                if(ipcon !== undefined) {
                    ipcon.disconnect();
                }
                ipcon = new Tinkerforge.IPConnection(); // Create IP connection
                var io = new Tinkerforge.BrickletIO16V2(UID, ipcon); // Create device object
                ipcon.connect(HOST, PORT,
                    function(error) {
                        textArea.value += 'Error: ' + error + '\n';
                    }
                ); // Connect to brickd
                // Don't use device before ipcon is connected

                ipcon.on(Tinkerforge.IPConnection.CALLBACK_CONNECTED,
                    function (connectReason) {
                        // Configure channel 7 as output low
                        io.setConfiguration(7, 'o', false);

                        // Set channel 7 alternating high/low 10 times with 100 ms delay
                        for(var i = 0; i < 10; ++i) {
                            setTimeout(function () {
                                io.setSelectedValue(7, true);
                            }, 200 * i + 100);
                            setTimeout(function () {
                                io.setSelectedValue(7, false);
                            }, 200 * i + 200);
                        }
                    }
                );
            }
        </script>
    </body>
</html>

Interrupt (HTML)

Download (ExampleInterrupt.html), Test (ExampleInterrupt.html)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
<!DOCTYPE html>
<html>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <head>
        <title>Tinkerforge | JavaScript Example</title>
    </head>
    <body>
        <div style="text-align:center;">
            <h1>IO-16 Bricklet 2.0 Interrupt Example</h1>
            <p>
                <input value="localhost" id="host" type="text" size="20">:
                <input value="4280" id="port" type="text" size="5">,
                <input value="uid" id="uid" type="text" size="5">
                <input value="Start Example" id="start" type="button" onclick="startExample();">
            </p>
            <p>
                <textarea readonly id="text" cols="80" rows="24" style="resize:none;"
                          >Press "Start Example" to begin ...</textarea>
            </p>
        </div>
        <script src="./Tinkerforge.js" type='text/javascript'></script>
        <script type='text/javascript'>
            var ipcon;
            var textArea = document.getElementById("text");
            function startExample() {
                textArea.value = "";
                var HOST = document.getElementById("host").value;
                var PORT = parseInt(document.getElementById("port").value);
                var UID = document.getElementById("uid").value;
                if(ipcon !== undefined) {
                    ipcon.disconnect();
                }
                ipcon = new Tinkerforge.IPConnection(); // Create IP connection
                var io = new Tinkerforge.BrickletIO16V2(UID, ipcon); // Create device object
                ipcon.connect(HOST, PORT,
                    function(error) {
                        textArea.value += 'Error: ' + error + '\n';
                    }
                ); // Connect to brickd
                // Don't use device before ipcon is connected

                ipcon.on(Tinkerforge.IPConnection.CALLBACK_CONNECTED,
                    function (connectReason) {
                        // Set period for input value (channel 4) callback to 0.5s (500ms)
                        io.setInputValueCallbackConfiguration(4, 500, false);
                    }
                );

                // Register input value callback
                io.on(Tinkerforge.BrickletIO16V2.CALLBACK_INPUT_VALUE,
                    // Callback function for input value callback
                    function (channel, changed, value) {
                        textArea.value += 'Channel: ' + channel + '\n';
                        textArea.value += 'Changed: ' + changed + '\n';
                        textArea.value += 'Value: ' + value + '\n';
                        textArea.value += '\n';
                        textArea.scrollTop = textArea.scrollHeight;
                    }
                );
            }
        </script>
    </body>
</html>

API

Generally, every method of the JavaScript bindings can take two optional parameters, returnCallback and errorCallback. These are two user defined callback functions. The returnCallback is called with the return values as parameters, if the method returns something. The errorCallback is called with an error code in case of an error. The error code can be one of the following values:

  • IPConnection.ERROR_ALREADY_CONNECTED = 11
  • IPConnection.ERROR_NOT_CONNECTED = 12
  • IPConnection.ERROR_CONNECT_FAILED = 13
  • IPConnection.ERROR_INVALID_FUNCTION_ID = 21
  • IPConnection.ERROR_TIMEOUT = 31
  • IPConnection.ERROR_INVALID_PARAMETER = 41
  • IPConnection.ERROR_FUNCTION_NOT_SUPPORTED = 42
  • IPConnection.ERROR_UNKNOWN_ERROR = 43

The namespace for the JavaScript bindings is Tinkerforge.*.

The Bricklet has sixteen channels that are named 0 to 15 in the API. The corresponding connectors on the Bricklet are labeled A0 to A7 for channel 0 to 7 and B0 to B7 for channels 8 to 15.

Basic Functions

new BrickletIO16V2(uid, ipcon)
Parameters:
  • uid -- string
  • ipcon -- IPConnection

Creates an object with the unique device ID uid:

var io16V2 = new BrickletIO16V2("YOUR_DEVICE_UID", ipcon);

This object can then be used after the IP Connection is connected (see examples above).

BrickletIO16V2.setValue(value[, returnCallback][, errorCallback])
Parameters:
  • value -- [boolean, boolean, ..13x.., boolean]
Callback:

undefined

Sets the output value of all sixteen channels. A value of true or false outputs logic 1 or logic 0 respectively on the corresponding channel.

Use setSelectedValue() to change only one output channel state.

For example: (True, True, False, False, ..., False) will turn the channels 0-1 high and the channels 2-15 low.

Note

This function does nothing for channels that are configured as input. Pull-up resistors can be switched on with setConfiguration().

BrickletIO16V2.getValue([returnCallback][, errorCallback])
Callback:
  • value -- [boolean, boolean, ..13x.., boolean]

Returns the logic levels that are currently measured on the channels. This function works if the channel is configured as input as well as if it is configured as output.

BrickletIO16V2.setSelectedValue(channel, value[, returnCallback][, errorCallback])
Parameters:
  • channel -- int
  • value -- boolean
Callback:

undefined

Sets the output value of a specific channel without affecting the other channels.

Note

This function does nothing for channels that are configured as input. Pull-up resistors can be switched on with setConfiguration().

BrickletIO16V2.setConfiguration(channel, direction, value[, returnCallback][, errorCallback])
Parameters:
  • channel -- int
  • direction -- char
  • value -- boolean
Callback:

undefined

Configures the value and direction of a specific channel. Possible directions are 'i' and 'o' for input and output.

If the direction is configured as output, the value is either high or low (set as true or false).

If the direction is configured as input, the value is either pull-up or default (set as true or false).

For example:

  • (0, 'i', true) will set channel-0 as input pull-up.
  • (1, 'i', false) will set channel-1 as input default (floating if nothing is connected).
  • (2, 'o', true) will set channel-2 as output high.
  • (3, 'o', false) will set channel-3 as output low.

The default configuration is input with pull-up.

The following constants are available for this function:

  • BrickletIO16V2.DIRECTION_IN = 'i'
  • BrickletIO16V2.DIRECTION_OUT = 'o'

Advanced Functions

BrickletIO16V2.setMonoflop(channel, value, time[, returnCallback][, errorCallback])
Parameters:
  • channel -- int
  • value -- boolean
  • time -- int
Callback:

undefined

Configures a monoflop of the specified channel.

The second parameter is the desired value of the specified channel. A true means relay closed and a false means relay open.

The third parameter indicates the time (in ms) that the channels should hold the value.

If this function is called with the parameters (0, 1, 1500) channel 0 will close and in 1.5s channel 0 will open again

A monoflop can be used as a fail-safe mechanism. For example: Lets assume you have a RS485 bus and a IO-16 Bricklet 2.0 connected to one of the slave stacks. You can now call this function every second, with a time parameter of two seconds and channel 0 closed. Channel 0 will be closed all the time. If now the RS485 connection is lost, then channel 0 will be opened in at most two seconds.

BrickletIO16V2.getMonoflop(channel[, returnCallback][, errorCallback])
Parameters:
  • channel -- int
Callback:
  • value -- boolean
  • time -- int
  • timeRemaining -- int

Returns (for the given channel) the current value and the time as set by setMonoflop() as well as the remaining time until the value flips.

If the timer is not running currently, the remaining time will be returned as 0.

BrickletIO16V2.getEdgeCount(channel, resetCounter[, returnCallback][, errorCallback])
Parameters:
  • channel -- int
  • resetCounter -- boolean
Callback:
  • count -- int

Returns the current value of the edge counter for the selected channel. You can configure the edges that are counted with setEdgeCountConfiguration().

If you set the reset counter to true, the count is set back to 0 directly after it is read.

BrickletIO16V2.setEdgeCountConfiguration(channel, edgeType, debounce[, returnCallback][, errorCallback])
Parameters:
  • channel -- int
  • edgeType -- int
  • debounce -- int
Callback:

undefined

Configures the edge counter for a specific channel.

The edge type parameter configures if rising edges, falling edges or both are counted if the channel is configured for input. Possible edge types are:

  • 0 = rising (default)
  • 1 = falling
  • 2 = both

The debounce time is given in ms.

Configuring an edge counter resets its value to 0.

If you don't know what any of this means, just leave it at default. The default configuration is very likely OK for you.

Default values: 0 (edge type) and 100ms (debounce time)

The following constants are available for this function:

  • BrickletIO16V2.EDGE_TYPE_RISING = 0
  • BrickletIO16V2.EDGE_TYPE_FALLING = 1
  • BrickletIO16V2.EDGE_TYPE_BOTH = 2
BrickletIO16V2.getEdgeCountConfiguration(channel[, returnCallback][, errorCallback])
Parameters:
  • channel -- int
Callback:
  • edgeType -- int
  • debounce -- int

Returns the edge type and debounce time for the selected channel as set by setEdgeCountConfiguration().

The following constants are available for this function:

  • BrickletIO16V2.EDGE_TYPE_RISING = 0
  • BrickletIO16V2.EDGE_TYPE_FALLING = 1
  • BrickletIO16V2.EDGE_TYPE_BOTH = 2
BrickletIO16V2.getAPIVersion()
Return type:[int, int, int]

Returns the version of the API definition (major, minor, revision) implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

BrickletIO16V2.getResponseExpected(functionId[, errorCallback])
Parameters:
  • functionId -- int
Return type:

boolean

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by setResponseExpected(). For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

See setResponseExpected() for the list of function ID constants available for this function.

BrickletIO16V2.setResponseExpected(functionId, responseExpected[, errorCallback])
Parameters:
  • functionId -- int
  • responseExpected -- boolean

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

The following function ID constants are available for this function:

  • BrickletIO16V2.FUNCTION_SET_VALUE = 1
  • BrickletIO16V2.FUNCTION_SET_SELECTED_VALUE = 3
  • BrickletIO16V2.FUNCTION_SET_CONFIGURATION = 4
  • BrickletIO16V2.FUNCTION_SET_INPUT_VALUE_CALLBACK_CONFIGURATION = 6
  • BrickletIO16V2.FUNCTION_SET_ALL_INPUT_VALUE_CALLBACK_CONFIGURATION = 8
  • BrickletIO16V2.FUNCTION_SET_MONOFLOP = 10
  • BrickletIO16V2.FUNCTION_SET_EDGE_COUNT_CONFIGURATION = 13
  • BrickletIO16V2.FUNCTION_SET_WRITE_FIRMWARE_POINTER = 237
  • BrickletIO16V2.FUNCTION_SET_STATUS_LED_CONFIG = 239
  • BrickletIO16V2.FUNCTION_RESET = 243
  • BrickletIO16V2.FUNCTION_WRITE_UID = 248
BrickletIO16V2.setResponseExpectedAll(responseExpected)
Parameters:
  • responseExpected -- boolean

Changes the response expected flag for all setter and callback configuration functions of this device at once.

BrickletIO16V2.getSPITFPErrorCount([returnCallback][, errorCallback])
Callback:
  • errorCountAckChecksum -- int
  • errorCountMessageChecksum -- int
  • errorCountFrame -- int
  • errorCountOverflow -- int

Returns the error count for the communication between Brick and Bricklet.

The errors are divided into

  • ACK checksum errors,
  • message checksum errors,
  • framing errors and
  • overflow errors.

The errors counts are for errors that occur on the Bricklet side. All Bricks have a similar function that returns the errors on the Brick side.

BrickletIO16V2.setBootloaderMode(mode[, returnCallback][, errorCallback])
Parameters:
  • mode -- int
Callback:
  • status -- int

Sets the bootloader mode and returns the status after the requested mode change was instigated.

You can change from bootloader mode to firmware mode and vice versa. A change from bootloader mode to firmware mode will only take place if the entry function, device identifier and CRC are present and correct.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

The following constants are available for this function:

  • BrickletIO16V2.BOOTLOADER_MODE_BOOTLOADER = 0
  • BrickletIO16V2.BOOTLOADER_MODE_FIRMWARE = 1
  • BrickletIO16V2.BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT = 2
  • BrickletIO16V2.BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT = 3
  • BrickletIO16V2.BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT = 4
  • BrickletIO16V2.BOOTLOADER_STATUS_OK = 0
  • BrickletIO16V2.BOOTLOADER_STATUS_INVALID_MODE = 1
  • BrickletIO16V2.BOOTLOADER_STATUS_NO_CHANGE = 2
  • BrickletIO16V2.BOOTLOADER_STATUS_ENTRY_FUNCTION_NOT_PRESENT = 3
  • BrickletIO16V2.BOOTLOADER_STATUS_DEVICE_IDENTIFIER_INCORRECT = 4
  • BrickletIO16V2.BOOTLOADER_STATUS_CRC_MISMATCH = 5
BrickletIO16V2.getBootloaderMode([returnCallback][, errorCallback])
Callback:
  • mode -- int

Returns the current bootloader mode, see setBootloaderMode().

The following constants are available for this function:

  • BrickletIO16V2.BOOTLOADER_MODE_BOOTLOADER = 0
  • BrickletIO16V2.BOOTLOADER_MODE_FIRMWARE = 1
  • BrickletIO16V2.BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT = 2
  • BrickletIO16V2.BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT = 3
  • BrickletIO16V2.BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT = 4
BrickletIO16V2.setWriteFirmwarePointer(pointer[, returnCallback][, errorCallback])
Parameters:
  • pointer -- int
Callback:

undefined

Sets the firmware pointer for writeFirmware(). The pointer has to be increased by chunks of size 64. The data is written to flash every 4 chunks (which equals to one page of size 256).

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

BrickletIO16V2.writeFirmware(data[, returnCallback][, errorCallback])
Parameters:
  • data -- [int, int, ..61x.., int]
Callback:
  • status -- int

Writes 64 Bytes of firmware at the position as written by setWriteFirmwarePointer() before. The firmware is written to flash every 4 chunks.

You can only write firmware in bootloader mode.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

BrickletIO16V2.setStatusLEDConfig(config[, returnCallback][, errorCallback])
Parameters:
  • config -- int
Callback:

undefined

Sets the status LED configuration. By default the LED shows communication traffic between Brick and Bricklet, it flickers once for every 10 received data packets.

You can also turn the LED permanently on/off or show a heartbeat.

If the Bricklet is in bootloader mode, the LED is will show heartbeat by default.

The following constants are available for this function:

  • BrickletIO16V2.STATUS_LED_CONFIG_OFF = 0
  • BrickletIO16V2.STATUS_LED_CONFIG_ON = 1
  • BrickletIO16V2.STATUS_LED_CONFIG_SHOW_HEARTBEAT = 2
  • BrickletIO16V2.STATUS_LED_CONFIG_SHOW_STATUS = 3
BrickletIO16V2.getStatusLEDConfig([returnCallback][, errorCallback])
Callback:
  • config -- int

Returns the configuration as set by setStatusLEDConfig()

The following constants are available for this function:

  • BrickletIO16V2.STATUS_LED_CONFIG_OFF = 0
  • BrickletIO16V2.STATUS_LED_CONFIG_ON = 1
  • BrickletIO16V2.STATUS_LED_CONFIG_SHOW_HEARTBEAT = 2
  • BrickletIO16V2.STATUS_LED_CONFIG_SHOW_STATUS = 3
BrickletIO16V2.getChipTemperature([returnCallback][, errorCallback])
Callback:
  • temperature -- int

Returns the temperature in °C as measured inside the microcontroller. The value returned is not the ambient temperature!

The temperature is only proportional to the real temperature and it has bad accuracy. Practically it is only useful as an indicator for temperature changes.

BrickletIO16V2.reset([returnCallback][, errorCallback])
Callback:undefined

Calling this function will reset the Bricklet. All configurations will be lost.

After a reset you have to create new device objects, calling functions on the existing ones will result in undefined behavior!

BrickletIO16V2.writeUID(uid[, returnCallback][, errorCallback])
Parameters:
  • uid -- int
Callback:

undefined

Writes a new UID into flash. If you want to set a new UID you have to decode the Base58 encoded UID string into an integer first.

We recommend that you use Brick Viewer to change the UID.

BrickletIO16V2.readUID([returnCallback][, errorCallback])
Callback:
  • uid -- int

Returns the current UID as an integer. Encode as Base58 to get the usual string version.

BrickletIO16V2.getIdentity([returnCallback][, errorCallback])
Callback:
  • uid -- string
  • connectedUid -- string
  • position -- char
  • hardwareVersion -- [int, int, int]
  • firmwareVersion -- [int, int, int]
  • deviceIdentifier -- int

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c' or 'd'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Bricklet.

Callback Configuration Functions

BrickletIO16V2.on(callback_id, function)
Parameters:
  • callback_id -- int
  • function -- function

Registers the given function with the given callback_id.

The available callback IDs with corresponding function signatures are listed below.

BrickletIO16V2.getConfiguration(channel[, returnCallback][, errorCallback])
Parameters:
  • channel -- int
Callback:
  • direction -- char
  • value -- boolean

Returns the channel configuration as set by setConfiguration().

The following constants are available for this function:

  • BrickletIO16V2.DIRECTION_IN = 'i'
  • BrickletIO16V2.DIRECTION_OUT = 'o'
BrickletIO16V2.setInputValueCallbackConfiguration(channel, period, valueHasToChange[, returnCallback][, errorCallback])
Parameters:
  • channel -- int
  • period -- int
  • valueHasToChange -- boolean
Callback:

undefined

This callback can be configured per channel.

The period in ms is the period with which the CALLBACK_INPUT_VALUE callback is triggered periodically. A value of 0 turns the callback off.

If the value has to change-parameter is set to true, the callback is only triggered after the value has changed. If the value didn't change within the period, the callback is triggered immediately on change.

If it is set to false, the callback is continuously triggered with the period, independent of the value.

The default value is (0, false).

BrickletIO16V2.getInputValueCallbackConfiguration(channel[, returnCallback][, errorCallback])
Parameters:
  • channel -- int
Callback:
  • period -- int
  • valueHasToChange -- boolean

Returns the callback configuration as set by setInputValueCallbackConfiguration().

BrickletIO16V2.setAllInputValueCallbackConfiguration(period, valueHasToChange[, returnCallback][, errorCallback])
Parameters:
  • period -- int
  • valueHasToChange -- boolean
Callback:

undefined

The period in ms is the period with which the CALLBACK_ALL_INPUT_VALUE callback is triggered periodically. A value of 0 turns the callback off.

If the value has to change-parameter is set to true, the callback is only triggered after the value has changed. If the value didn't change within the period, the callback is triggered immediately on change.

If it is set to false, the callback is continuously triggered with the period, independent of the value.

The default value is (0, false).

BrickletIO16V2.getAllInputValueCallbackConfiguration([returnCallback][, errorCallback])
Callback:
  • period -- int
  • valueHasToChange -- boolean

Returns the callback configuration as set by setAllInputValueCallbackConfiguration().

Callbacks

Callbacks can be registered to receive time critical or recurring data from the device. The registration is done with the on() function of the device object. The first parameter is the callback ID and the second parameter the callback function:

io16V2.on(BrickletIO16V2.CALLBACK_EXAMPLE,
    function (param) {
        console.log(param);
    }
);

The available constants with inherent number and type of parameters are described below.

Note

Using callbacks for recurring events is always preferred compared to using getters. It will use less USB bandwidth and the latency will be a lot better, since there is no round trip time.

BrickletIO16V2.CALLBACK_INPUT_VALUE
Parameters:
  • channel -- int
  • changed -- boolean
  • value -- boolean

This callback is triggered periodically according to the configuration set by setInputValueCallbackConfiguration().

The parameters are the channel, a value-changed indicator and the actual value for the channel. The changed parameter is true if the value has changed since the last callback.

BrickletIO16V2.CALLBACK_ALL_INPUT_VALUE
Parameters:
  • changed -- [boolean, boolean, ..13x.., boolean]
  • value -- [boolean, boolean, ..13x.., boolean]

This callback is triggered periodically according to the configuration set by setAllInputValueCallbackConfiguration().

The parameters are the same as getValue(). Additional the changed parameter is true if the value has changed since the last callback.

BrickletIO16V2.CALLBACK_MONOFLOP_DONE
Parameters:
  • channel -- int
  • value -- boolean

This callback is triggered whenever a monoflop timer reaches 0. The parameters contain the channel and the current value of the channel (the value after the monoflop).

Constants

BrickletIO16V2.DEVICE_IDENTIFIER

This constant is used to identify a IO-16 Bricklet 2.0.

The getIdentity() function and the CALLBACK_ENUMERATE callback of the IP Connection have a device_identifier parameter to specify the Brick's or Bricklet's type.

BrickletIO16V2.DEVICE_DISPLAY_NAME

This constant represents the human readable name of a IO-16 Bricklet 2.0.