Perl - Sound Intensity Bricklet

This is the description of the Perl API bindings for the Sound Intensity Bricklet. General information and technical specifications for the Sound Intensity Bricklet are summarized in its hardware description.

An installation guide for the Perl API bindings is part of their general description.

Examples

The example code below is Public Domain (CC0 1.0).

Simple

Download (example_simple.pl)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
#!/usr/bin/perl

use strict;
use Tinkerforge::IPConnection;
use Tinkerforge::BrickletSoundIntensity;

use constant HOST => 'localhost';
use constant PORT => 4223;
use constant UID => 'XYZ'; # Change XYZ to the UID of your Sound Intensity Bricklet

my $ipcon = Tinkerforge::IPConnection->new(); # Create IP connection
my $si = Tinkerforge::BrickletSoundIntensity->new(&UID, $ipcon); # Create device object

$ipcon->connect(&HOST, &PORT); # Connect to brickd
# Don't use device before ipcon is connected

# Get current intensity
my $intensity = $si->get_intensity();
print "Intensity: $intensity\n";

print "Press key to exit\n";
<STDIN>;
$ipcon->disconnect();

Callback

Download (example_callback.pl)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
#!/usr/bin/perl

use strict;
use Tinkerforge::IPConnection;
use Tinkerforge::BrickletSoundIntensity;

use constant HOST => 'localhost';
use constant PORT => 4223;
use constant UID => 'XYZ'; # Change XYZ to the UID of your Sound Intensity Bricklet

# Callback subroutine for intensity callback
sub cb_intensity
{
    my ($intensity) = @_;

    print "Intensity: $intensity\n";
}

my $ipcon = Tinkerforge::IPConnection->new(); # Create IP connection
my $si = Tinkerforge::BrickletSoundIntensity->new(&UID, $ipcon); # Create device object

$ipcon->connect(&HOST, &PORT); # Connect to brickd
# Don't use device before ipcon is connected

# Register intensity callback to subroutine cb_intensity
$si->register_callback($si->CALLBACK_INTENSITY, 'cb_intensity');

# Set period for intensity callback to 0.05s (50ms)
# Note: The intensity callback is only called every 0.05 seconds
#       if the intensity has changed since the last call!
$si->set_intensity_callback_period(50);

print "Press key to exit\n";
<STDIN>;
$ipcon->disconnect();

Threshold

Download (example_threshold.pl)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
#!/usr/bin/perl

use strict;
use Tinkerforge::IPConnection;
use Tinkerforge::BrickletSoundIntensity;

use constant HOST => 'localhost';
use constant PORT => 4223;
use constant UID => 'XYZ'; # Change XYZ to the UID of your Sound Intensity Bricklet

# Callback subroutine for intensity reached callback
sub cb_intensity_reached
{
    my ($intensity) = @_;

    print "Intensity: $intensity\n";
}

my $ipcon = Tinkerforge::IPConnection->new(); # Create IP connection
my $si = Tinkerforge::BrickletSoundIntensity->new(&UID, $ipcon); # Create device object

$ipcon->connect(&HOST, &PORT); # Connect to brickd
# Don't use device before ipcon is connected

# Get threshold callbacks with a debounce time of 1 second (1000ms)
$si->set_debounce_period(1000);

# Register intensity reached callback to subroutine cb_intensity_reached
$si->register_callback($si->CALLBACK_INTENSITY_REACHED, 'cb_intensity_reached');

# Configure threshold for intensity "greater than 2000"
$si->set_intensity_callback_threshold('>', 2000, 0);

print "Press key to exit\n";
<STDIN>;
$ipcon->disconnect();

API

Generally, every subroutine of the Perl bindings can report an error as Tinkerforge::Error object via croak(). The object has a get_code() and a get_message() subroutine. There are different error code:

  • Error->ALREADY_CONNECTED = 11
  • Error->NOT_CONNECTED = 12
  • Error->CONNECT_FAILED = 13
  • Error->INVALID_FUNCTION_ID = 21
  • Error->TIMEOUT = 31
  • Error->INVALID_PARAMETER = 41
  • Error->FUNCTION_NOT_SUPPORTED = 42
  • Error->UNKNOWN_ERROR = 43

All methods listed below are thread-safe.

Basic Functions

BrickletSoundIntensity->new($uid, $ipcon)
Parameters:
  • $uid -- string
  • $ipcon -- IPConnection
Return type:

BrickletSoundIntensity

Creates an object with the unique device ID $uid:

$sound_intensity = BrickletSoundIntensity->new("YOUR_DEVICE_UID", $ipcon);

This object can then be used after the IP Connection is connected (see examples above).

BrickletSoundIntensity->get_intensity()
Return type:int

Returns the current sound intensity. The value has a range of 0 to 4095.

The value corresponds to the upper envelop of the signal of the microphone capsule.

If you want to get the intensity periodically, it is recommended to use the CALLBACK_INTENSITY callback and set the period with set_intensity_callback_period().

Advanced Functions

BrickletSoundIntensity->get_api_version()
Return type:[int, int, int]

Returns the version of the API definition (major, minor, revision) implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

BrickletSoundIntensity->get_response_expected($function_id)
Parameters:$function_id -- int
Return type:bool

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by set_response_expected(). For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

See set_response_expected() for the list of function ID constants available for this function.

BrickletSoundIntensity->set_response_expected($function_id, $response_expected)
Parameters:
  • $function_id -- int
  • $response_expected -- bool
Return type:

undef

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

The following function ID constants are available for this function:

  • BrickletSoundIntensity->FUNCTION_SET_INTENSITY_CALLBACK_PERIOD = 2
  • BrickletSoundIntensity->FUNCTION_SET_INTENSITY_CALLBACK_THRESHOLD = 4
  • BrickletSoundIntensity->FUNCTION_SET_DEBOUNCE_PERIOD = 6
BrickletSoundIntensity->set_response_expected_all($response_expected)
Parameters:$response_expected -- bool
Return type:undef

Changes the response expected flag for all setter and callback configuration functions of this device at once.

BrickletSoundIntensity->get_identity()
Return type:[string, string, char, [int, int, int], [int, int, int], int]

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c' or 'd'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Bricklet.

The returned array contains the elements uid, connected_uid, position, hardware_version, firmware_version and device_identifier.

Callback Configuration Functions

BrickletSoundIntensity->register_callback($id, $callback)
Parameters:
  • $id -- int
  • $callback -- string
Return type:

undef

Registers the given $function name with the given $callback_id.

The available callback IDs with corresponding function signatures are listed below.

BrickletSoundIntensity->set_intensity_callback_period($period)
Parameters:$period -- int
Return type:undef

Sets the period in ms with which the CALLBACK_INTENSITY callback is triggered periodically. A value of 0 turns the callback off.

The CALLBACK_INTENSITY callback is only triggered if the intensity has changed since the last triggering.

The default value is 0.

BrickletSoundIntensity->get_intensity_callback_period()
Return type:int

Returns the period as set by set_intensity_callback_period().

BrickletSoundIntensity->set_intensity_callback_threshold($option, $min, $max)
Parameters:
  • $option -- char
  • $min -- int
  • $max -- int
Return type:

undef

Sets the thresholds for the CALLBACK_INTENSITY_REACHED callback.

The following options are possible:

Option Description
'x' Callback is turned off
'o' Callback is triggered when the intensity is outside the min and max values
'i' Callback is triggered when the intensity is inside the min and max values
'<' Callback is triggered when the intensity is smaller than the min value (max is ignored)
'>' Callback is triggered when the intensity is greater than the min value (max is ignored)

The default value is ('x', 0, 0).

The following constants are available for this function:

  • BrickletSoundIntensity->THRESHOLD_OPTION_OFF = 'x'
  • BrickletSoundIntensity->THRESHOLD_OPTION_OUTSIDE = 'o'
  • BrickletSoundIntensity->THRESHOLD_OPTION_INSIDE = 'i'
  • BrickletSoundIntensity->THRESHOLD_OPTION_SMALLER = '<'
  • BrickletSoundIntensity->THRESHOLD_OPTION_GREATER = '>'
BrickletSoundIntensity->get_intensity_callback_threshold()
Return type:[char, int, int]

Returns the threshold as set by set_intensity_callback_threshold().

The following constants are available for this function:

  • BrickletSoundIntensity->THRESHOLD_OPTION_OFF = 'x'
  • BrickletSoundIntensity->THRESHOLD_OPTION_OUTSIDE = 'o'
  • BrickletSoundIntensity->THRESHOLD_OPTION_INSIDE = 'i'
  • BrickletSoundIntensity->THRESHOLD_OPTION_SMALLER = '<'
  • BrickletSoundIntensity->THRESHOLD_OPTION_GREATER = '>'

The returned array contains the elements option, min and max.

BrickletSoundIntensity->set_debounce_period($debounce)
Parameters:$debounce -- int
Return type:undef

Sets the period in ms with which the threshold callback

is triggered, if the thresholds

keeps being reached.

The default value is 100.

BrickletSoundIntensity->get_debounce_period()
Return type:int

Returns the debounce period as set by set_debounce_period().

Callbacks

Callbacks can be registered to receive time critical or recurring data from the device. The registration is done with the register_callback() function of the device object. The first parameter is the callback ID and the second parameter the callback function name:

sub my_callback
{
    print "@_[0]";
}

$sound_intensity->register_callback(BrickletSoundIntensity->CALLBACK_EXAMPLE, 'my_callback')

The callback function will be called from an internal thread of the IP Connection. In contrast to many other programming languages, variables are not automatically shared between threads in Perl. If you want to share a global variable between a callback function and the rest for your program it has to be marked as :shared. See the documentation of the threads::shared Perl module for more details.

The available constants with inherent number and type of parameters are described below.

Note

Using callbacks for recurring events is always preferred compared to using getters. It will use less USB bandwidth and the latency will be a lot better, since there is no round trip time.

BrickletSoundIntensity->CALLBACK_INTENSITY
Parameters:$intensity -- int

This callback is triggered periodically with the period that is set by set_intensity_callback_period(). The parameter is the intensity of the sensor.

The CALLBACK_INTENSITY callback is only triggered if the intensity has changed since the last triggering.

BrickletSoundIntensity->CALLBACK_INTENSITY_REACHED
Parameters:$intensity -- int

This callback is triggered when the threshold as set by set_intensity_callback_threshold() is reached. The parameter is the intensity of the encoder.

If the threshold keeps being reached, the callback is triggered periodically with the period as set by set_debounce_period().

Constants

BrickletSoundIntensity->DEVICE_IDENTIFIER

This constant is used to identify a Sound Intensity Bricklet.

The get_identity() function and the CALLBACK_ENUMERATE callback of the IP Connection have a device_identifier parameter to specify the Brick's or Bricklet's type.

BrickletSoundIntensity->DEVICE_DISPLAY_NAME

This constant represents the human readable name of a Sound Intensity Bricklet.